Auto Key Program

2014 Audi A8L Smart Key Programming by Launch X431 Pro

Here is the instruction show you guide on how to use Launch X431 to do smart key programming for Audi A8L 2014.

 

What you need?

LAUNCH X431 PRO

 

Procedure:
1 Taking the X-431 PRO anti-theft matching device as an example, enter the Audi model and choose “Anti-theft Key Matching” .

2 Keep the network connection normal and choose “Key Learning” .

3 Connect the device to G3 and choose OK.

4 Save the password you have read and choose “Automatic Detection of Anti-theft System”

5 Choose OK.

6 Choose”Learn Key” .

7 Choose “Start” .

8 Place the key in the sensing area, turn off the ignition switch, turn on the ignition switch, and choose “OK”.

9 The anti-theft data is read successfully. Choose “Yes”.

10 Put the original car key in the sensing area of the programmer and choose OK.

11 Put a brand new key instead of the original car key in the sensing area and choose OK.

12 The key is generated successfully. Choose OK.

13 The key is generated successfully. Choose “NO”.

14 Turn on the ignition switch and choose OK.

15 Input the number of keys to be learned (keys not learned will be deleted) and choose OK.

16 Put the keys to be matched in the sensing area in turn.

17 The instrument display starts from 0/2. Put the first key in the sensing area and the instrument display will change to 1-2.

18 The instrument displays 1/2, indicating that the first key has been learned successfully.
Turn off the ignition switch, put the second key in the sensing area, and wait for the instrument to display 2/2.

19 The instrument displays 2/2, indicating that all keys have been learned successfully.

20 Key learning is successful.

More test report about Launch X431 please check:Launch X431 Test report

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago