FCOM Key On Engine Off KOEO Test for Ford Ka 1999

This article a guide on how to perform KOEO (Key-On Engine-Off) test. The test displays fault codes occured during the test. The PCM under test on the video has disconnected most components, thus a lot of errors.

Preparations:

FCOM Ford OBD2 Diagnostic Software Download

How to Install FCOM Diagnostic Software on Window/Linux

Preparations:

Plug your FCON interface to vehicle,then run FCOM software

Click “Select Control Unit”

Then select “PCM-Power Control Module (Engine ECU)” under Powertrain label

Click “Actuators activation” under “Advanced functions”

Select “Key On Engine Off test”,then click “Run Test”

Here,the PCM has disconnected most components,so it show a lot of DTCs as below picture.