AVDI (ABRITES Vehicle Diagnostic Interface) is latest generation automobile diagnosis and key programmer interface produced by Abrites ltd.(official website:www.abrites.com)
AVDI Diagnosis & Programmer Features:
Compatible with all diagnostic software produced by our company
One year free updates of all applications
One year free customer support
More information about the support plan here
SAE J2534 PASSTHRU compliant driver available for our interfaces
Compatible with many 3rd party diagnostic software
VCI emulator which can allow AVDI to emulate different interface units
Compatibility with VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS
Compatibility with Fiat EXAMINER
Supporting external communication link with transponder programmer and IC programmer
Compatibility with Toyota/Lexus/Scion Techstream
Compatibility with Honda/Acura HDS
Compatibility with Volvo VIDA
Compatibility with DAS/Xentry – Star Diagnosis
Compatibility with Nissan Consult III+
Compatibility with Ford Scanner
Compatibility with BMW – DIS over K-line and CAN bus
Compatibility with BMW Rheingold ISTA-P
Compatibility with BMW – E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus
Compatibility with Rover/Jaguar IDS
Compatibility with Subaru Select Monitor III
Compatibility with Bombardier diagnostic software
Compatibility with GM – Tech2Win, GDS2 and SPS diagnostic software
Compatibility with HYUNDAI GDS
Compatibility with KIA GDS
AVDI Diagnosis & Programmer Function List:
Reading Diagnostic Trouble Codes (DTC).
Clearing Diagnostic Trouble Codes (DTC).
Diagnostic Trouble Codes full identification with possible causes and solutions advice.
Live value monitoring, saving to file, analysis.
Actuator testing and monitoring.
Graph and table view of values being listed from multiple modules.
Key programming
Control module coding/programming/flashing
AVDI Diagnosis & Programmer Support Car List:
Support Cars, bikes, trucks, water scooters, ATVs and water scooters
Audi, Volkswagen, Seat, Skoda, Bentley, Lamborghini, Alfa Romeo, Lancia, Fiat, Chrysler, Dodge, Jeep, Renault, Dacia, BMW, Mini, Nissan, Infiniti, Toyota, Lexus, Scion, Ford, Mazda, Jaguar, Land Rover, Volvo, Opel, Vauxhall, Chevrolet, Mitsubishi, Hyundai, KIA, Suzuki, DAF, Subaru, Bombandier Recriational Products, Daihatsu, Ducati and others.
The Abrites Vehicle Diagnostics Interface (AVDI) is designed to comply with the following European Directives: 2004/108 / EC, 2006/95 / EC, 2011/65 / EU, 2012/19 / EU and meets the following safety norms: EN61010-1: 2010, EN61326-1: 2013. It has been tested in the laboratories of TÜV Rheinland and has a GS certificate, which guarantees the high quality of the product. It evolves with every new car model to answer the increasing demands of the automotive business, which makes it the best choice for professionals and advanced enthusiasts.
AVDI Diagnosis & Programmer Technical Specification:
K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector
ISO14230 compliant
SAE J1850 VPW,PWM compliant (needed additional adapter)
Single wire CAN bus multiplexed to different pins of diagnostic connector
Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector
Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector
CAN bus GMLAN, ISO14229, ISO15765, J1939, ISO22901 compliant
Analog Input
Optional Bluetooth connection
USB interface to the PC
Supply voltage 8..30V DC
OBDII cable
Updatable firmware
AVDI Diagnosis & Programmer Software Download:
Abrites Common Setup
https://abrites.com/en/download-abrites-common
AVDI Diagnosis & Programmer Price:
0
| # | Product Description | Price |
| I18 | AVDI basic diagnostic package | € 888 |
| The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo, Daihatsu, Subaru. Set includes PassThru (SAE J2534) compatible driver will allow usage of 3-rd party Hyundai/Kia GDS, GDS2 and Tech2Win – GM/OPEL, Jaguar, Land Rover, Mercedes DAS, BMW, Mini, Volvo, SkiDoo, SeaDoo, CanAm, Fiat Examiner, Toyota, Honda, VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS ….). Additionally you will receive VCI emulator which can allow AVDI to emulate different interface units (like K-line interface, ELM327 interface, ..). Emulation allowing you usage of many additional 3-rd party software’s – Webasto TT, Evinrude Diagnostics, Suzuki/Yamaha Marine Diagnostics and many other. | ||
| Initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services and one year free basic support plan (by email only). | ||
| AMS | Annual Maintenance Subscription 12 month subscription to access the latest software releases and online services | € 200 |
| Your initial purchase of the AVDI interface includes a one year access to the latest software updates of the basic diagnostic suite, tools, and our online services. To keep your software applications up to date and to maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage – this is provided separately by the Support Plan. | ||
| An active AMS is required to purchase additional special functions | ||
| SPS | Support Plan Service | € 150 |
| The Abrites Support Plan Service (SPS) allows the customers to receive support from the Abrites support team. The support team will analyze, detect, determine and provide possible solutions to issues that customers may face while using the Abrites products. | ||
| The SPS works in a written form using an Abrites ticketing platform. Read more here. | ||
| Once the SPS is purchased, an account in the platform is created for each customer where all the problem solving takes place instead of email. | ||
| The interval for initial response on behalf of ABRITES is up to 24 hours from case registration during business days. | ||
| The SPS can only be used with active Annual Maintenance Subscription (AMS). The duration of the SPS is 12 months from the date of purchase. | ||
| ZN002 | PROTAG Programmer | € 400 |
| The PROTAG programmer is the latest generation tool intended for operation with keys and transponders used in the latest authentication systems and immobilizers. TA31 Abrites extractor is included in the box. | ||
| ZN030 | ABPROG programmer | € 300 |
| The following ICs are supported M35080xx, D080D0WQ, D160D0WQ, SPI 95xxx, I2C 24XXX, Microwire 93XXX, mcu in BCM2 of Audi A4/A5/Q5/A6/A7/A8/ VW Touareg, mcu in BCM of Renault Megane III, Scenic III, Fluence. ABPROG programmer (ZN030) including the ZN031, ZN033 and ZN046 adapters. The ABPROG programmer works with the AVDI interface only. | ||
| This package also includes key renewal functionality. Please click here to view a full list of the supported key types. | ||
| ZN051 | Abrites Distribution Box | € 200 |
| The Distribution box consists of the following hardware: box with PCB and various sockets, set of cables with pins and fuses, HD15 Direct connection cable, crocodile pins, needle pins and DB25 AVDI connection cable. | ||
| VINR | VIN Reader | € 99 |
| The VIN Reader is a bluetooth-enabled device that allows the user to read the VIN (Vehicle Identification Number) from all modules that contain one in the vehicle. The reported VINs are also compared to all entries in a stolen-vehicle database after the scan. | ||
| BSU02 | Battery Support Unit Electromem FLASH-MEM 100 | contact us |
| for pricing | ||
| 100 Amp electronic battery charger and power supply for supply, charging, maintenance and reprogramming | ||
| Special Functions | ||
| # | Product Description | Price |
| ABRITES Diagnostics for Audi, VW, Seat, Skoda, Bentley | ||
| VN002 | VAG Parts Adaptation Special Function | € 2,500 |
| Special function for adapting electronic modules for VAG vehicles | ||
| For owners of functions AN043, AN045, AN046, AN048, AN049, AN052, AN053, AN055, AN056, AN057 please click here to see the pricing for completion | ||
| Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC. | ||
| Read/Program memory of instrument cluster immobilizer | ||
| Read/Update immobilizer related data | ||
| Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII | ||
| Extracting and displaying PIN code, control module configuration memory content, component security data from engine control units EDC16, MED9.x, Simos PPD 1.1/1.5, Magneti Marelli 4HV,7GV. Emergency start for engine control units EDC16. The whole EEPROM could be read for EDC15/ME7/EDC16. For MED9 and Simos engine control units only the PIN/CS/MAC is displayed. | ||
| Advanced Diagnostic Functionality – Ability to manage stored crash data and configuration memory of electronic control unit. Read/Update Config Data of airbag control units Siemens (CAN bus – ISO15765). Audi A6/Q7/Allroad, VW Golf5…, Skoda Octavia II …, Seat Altea … With this special function, you can Read/Update ConfData memory of the airbag module. Clear the crash data of the airbag module. | ||
| Covered units for Read/Update ConfData: | ||
| 1. All Siemens CAN Airbags 2003-2008 like 4F0959655B (Audi A6/Q7/Allroad 2003-2008), | ||
| 1K0909605AB, 1K0909605C, 1K0909605AD, etc… | ||
| 2. K-Line Airbags (Siemens and Bosch) – 1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 | ||
| 605 C,6Q0 909 605 A, 6Q0 909 605 B, 3B0 959 655 B, 1C0 909 605 F, 1C0 909 605 H, 1J0 909 | ||
| 607, 1J0 909 603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 8L0 959 655 F,8A0 959 655 | ||
| C, 8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L | ||
| Preparation of a key ready for adaptation by diagnostic to the vehicles with BCM2 – Audi A4, S4, RS4, A5, S5, RS5, A6, A7, A8, Q5 / VW Touareg | ||
| + ILM Front passenger ((ILM Beifahrer) – Audi A8 2003-2010 | ||
| Component protection generation 2 | ||
| EZS-Kessy Audi A6/Q7 2004-2009 by OBDII | ||
| Comfort module Audi A6/Q7 2004-2009 by OBDII | ||
| Climantronic Audi A6/Q7 2004-2009 by OBDII | ||
| Airbag Audi A6/Q7 2004-2009 by OBDII | ||
| Airbag Audi A4/A5/Q5 2008+ from Bosch by OBDII | ||
| Instrument cluster Audi A6/Q7 2004-2009 by OBDII | ||
| Instrument Cluster Audi A4/A5/Q5 2008+ by OBDII | ||
| Infotainment electr. Audi A4/A5/Q5 2008+ by OBDII | ||
| – All other modules (e.g. DSP) with component protection generation 2 | ||
| for A6/Q7 2004-2009 and A4/A5/A5 possible only if you have dump from gateway from where module was originally build | ||
| + Adaptation of engine control units to the vehicle – EDC16,EDC17, MED17, MED9, Simos PPD, ME7.5.20, ME7.5.30 | ||
| Kessy Audi A8/VW Touareg/Phaeton | ||
| Comfort module VW Passat B6/CC | ||
| Transmission gearbox Audi A6/Q7/Allroad/A8 | ||
| EZS-Kessy Audi A6/Q7/Allroad | ||
| BCM2 immobilzier – Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg | ||
| +read the PIN and CS of the EDC17/MED17 engine control units. With this function is possible to read even engine control units 2012+ which are with | ||
| updated software and is not possible to read normally by OBDII.With this special function the EDC17/MED17 is not read through OBDII – you should have direct connection to the engine | ||
| control unit. It is possible to make this on the table, you need to connect only 12V, GND, Ignition, CAN-H and CAN-L. It is possible to read the ECU also in the car, but you need to find | ||
| somewhere the CAN-H (orange-black) and CAN-L (orange-brown) wires. So connect them to the AVDI and you will be able to read the engine control units. | ||
| + adapt the transmission control unit (TCU) to the immobilizer (BCM2). For that purpose is necessary first to read the TCU. The TCU is not possible to be read by OBDII, | ||
| but is possible to read it when you connect the TCU on the table, or when you connect the AVDI to the internal CAN-Bus of the car. | ||
| To read from the internal CAN-Bus, find the orange/black and orange/brown CAN wires and make the following connection of the AVDI: | ||
| – orange/black <-> CAN-H (PIN6 of the OBDII) | ||
| – orange/brown <-> CAN-L (PIN14 of the OBDII) | ||
| – Ground <-> GND (PIN4 of the OBDII) | ||
| – 12V <-> 12V (PIN16 of the OBDII) | ||
| +reading the PIN/CS/MAC of the Simos PCR 2.1 engine control unit. | ||
| NOTE: This function requires internet access | ||
| New AVDI Interface or active AMS is required to purchase this special function. | ||
| VN003 | VAG Key Learning Special Function | € 3,150 |
| Special function for learning keys to VAG vehicles | ||
| For owners of functions AN043, AN044, AN045, AN049, AN050, AN059 please click here to see the pricing for completion | ||
| +Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC | ||
| Read/Program memory of instrument cluster immobilizer | ||
| Read/Update immobilizer related data | ||
| Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII | ||
| + Extracting and displaying PIN code, control module configuration memory content, component security data from engine control units EDC16, MED9.x, Simos PPD 1.1/1.5, Magneti Marelli 4HV,7GV. Emergency start for engine control units EDC16. The whole EEPROM could be read for EDC15/ME7/EDC16. For MED9 and Simos engine control units only the PIN/CS/MAC is displayed. | ||
| + This function will allow the preparation of a key ready for adaptation by diagnostic to the vehicles with BCM2 – Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg | ||
| + Guided key adaptation functions, preparation keys suitable for the vehicle (dealer’s keys). Included are also Audi A6, Audi Q7, Audi Allroad, VW Crafter(with EDC16 ECU), VW Passat, (BCM2 based vehicles are supported only with the help of ABProg*) | ||
| Key programming/adaptation | ||
| Reading security code (PIN) and component protection by OBDII – VW CRAFTER | ||
| EZS – Kessy (Q7/A6/Allroad) – With this function you can prepare dealer key/learn dealer key- Read/Update ConfData from EZS – Kessy (Q7/A6/Allroad) | ||
| Programming keys by OBDII (VAG with 16 bytes Component Security) – VW Crafter, Audi R8, VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, … | ||
| Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2) | ||
| LAMBORGHINI GALLARDO | ||
| Key learning for Audi A6/A7/A8 with ALL KEYs LOST. | ||
| New AVDI Interface or active AMS is required to purchase this special function. | ||
| VN005 | VN005 – Immo III/IV emulation | € 750 |
| The function allows to replace immo-related parts in another vehicle, even when the brand is different or the power class is different. | ||
| The function works for the transmissions of Audi A6 2003-2010, Audi Q7 2005-2015, Audi A8 2003-2010, | ||
| and for all Immo III/IV engine control units where writing is not permitted. (EDC16/EDC17/ME7/MED9/MED17/Simos benzin/Simos PPD/Simos PCR/Magneti Marelli/Delphi). The function requires internet connection and a complete VN002. | ||
| Attention: | ||
| The VN005 special function requires VN002 as well as an additional cable set (ZN052) that allows you to start and complete the operation. Each module that is adapted (TCU or ECU) will require an EM003 emulator to be built inside the car. | ||
| VN006 | Immo III/IV Megamos 48 Key Programming | € 550 |
| The function allows the programming of keys to ALL VEHICLES with Immo III/IV immobiliser systems and Megamos 48 transponders. | ||
| The function works both when there is a working key and in ALL KEYS LOST situations. | ||
| A ZN053 AVDI extractor cable IS REQUIRED when purchasing the special function. | ||
| The procedure also requires a ZN051 Distribution Box and an internet connection. | ||
| VN007 | Mileage recalibration for MQB vehicles | € 600 |
| Mileage recalibration for vehicles based on the MQB platform from 2014 onwards. For a full list of supported models please click here | ||
| Active AMS and internet connection are required. | ||
| VN009 | Key programming for MQB vehicles | € 1,000 |
| Key programming for vehicles based on the MQB platform. This includes all models starting from 2012 onwards. | ||
| PROTAG programmer, active AMS and internet connection are required. | ||
| VN012 | Security data extraction for VAG vehicles with Magneti Marelli 9GV ECU | € 200 |
| Reading the PIN and Component Security of the Magneti Marelli 9GV ECU. Procedure is done by OBDII with a working key or on the bench (using the ZN051 Distribution Box without opening the ECU) when all keys are lost. | ||
| VN013 | ECU authorization for all Immo 3 and Immo 4 vehicles | € 150 |
| Performing authorization (using the ZN051 Distribution Box) of the vehicle ECU in order to update the engine software or to start the vehicle for ALL IMMO 3/IMMO 4 ECUs (Bosch, Siemens/Continental and Magneti Marelli). Allows entering into reflashing mode to update with a SGO/FRF file or to perform an emergency start to the vehicle. | ||
| VN015 | Odometer recalibration for VAG vehicles | € 1,000 |
| -Mileage recalibration for Audi A6/A7 (4G) and A8 (D4) and VW Touareg 7P produced from 2010 until 2017 BY OBDII. | ||
| The function works with UDS dashboards. | ||
| -Reading and updating internal control module configuration memory by diagnostics. | ||
| Extracting and recalibration security access codes, PIN, component security bytes, current unit mileage values by K-line, CAN bus and UDS. | ||
| -Cluster CAN – With this function you can establish a disgnostic session with the instrument cluster using KWP2000 over TP2.0 or UDS. | ||
| You can Read/Update the odometer values. Supported types are: – VDO/MM/Visteon -2007 (CAN TP2.0)- VDO with NEC μC 2009+ (CAN UDS)- JCI with NEC μC | ||
| and 95320 EEPROM (CAN UDS)- Magneti Marelli with 9S12 μC (CAN UDS)- A8(4H)/A7(4G)/A6(4G)/Touareg(7P) with 95320 EEPROM (CAN UDS) | ||
| -Cluster K-Line – With this function you can establish a disgnostic session with the Instrument cluster via K-Line | ||
| (KWP1281 or KWP2000); You can Read/update the odometer value; Read PIN code; Read/Update ConfData; Read ROM/Flash from the Instrument cluster; | ||
| Automatic removing of “DEF error” for Audi A4 instrument cluster BOSCH RB8. Supported types are:- VDO66/86, Motometer- External Immobilizer – LT, | ||
| VW GOL, VW O GOL( Kostal ), Siemens 6 PIN HC05 Immo/TMS- Audi A4 B5 with/without board computer -1997- Audi A6 -1997- Audi A8 -1999- Magneti Marelli – Shadow 1/2/3/Direct- | ||
| VW Sharan/Galaxy -2000- Audi A4 Bosch RBx/RB4/RB4 Crypto/RB8 Crypto 2004+- Golf 4 Bosch RBx- VW Phaeton/Touareg, Bentley Continental, | ||
| Porsche Cayenne- Seat Exeo Bosch RB8 Crypto 2008+- Lamborghini Gallardo -2005/2005+ | ||
| -Read/Update ConfData (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.) | ||
| -Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8) – Extracting Component security bytes | ||
| (EDC15, ME7.x, VAG-Cartronic ME7.8)- Mileage Calibration (EDC15, EDC16) | ||
| VAG Km | Special functions set for VAG mileage recalibration VN007, VN015 | € 1,600 |
| Full set of mileage recalibration special functions for VAG. | ||
| VAG Key | Special functions set for VAG key programming VN003, VN006, VN009 | € 4,700 |
| Full set of key programming special functions for VAG. The following hardware IS REQUIRED in order to obtain full functionality: | ||
| ZN002 PROTAG Programmer | ||
| ZN051 Distribution Box | ||
| ZN053 AVDI Extractor Cable | ||
| VAG FULL | Full VAG special functions set VN002, VN003, VN005, VN006, VN007, VN009, VN012, VN013, VN015 | € 8,780 |
| Full set of special functions for VAG. The following hardware IS REQUIRED in order to obtain full functionality: | ||
| ZN002 PROTAG Programmer | ||
| ZN051 Distribution Box | ||
| ZN052 Abrites cable set for adapting IMMO parts used together with VN005 | ||
| ZN053 AVDI Extractor Cable | ||
| ABRITES Diagnostics for Mercedes, Smart, Maybach | ||
| MN026 | Key Programming, EIS/ESL/DAS Manager/7-Gear ETC/ISM/Infra Red and password reader/Personalization/Activation/Coding | € 2,200 |
| Generating of key dumps for vehicles with DAS-2, DAS-2A, DAS-2B, DAS-3.Smart key programming. Read partially data of the EIS. Read/update configuration data of the ESL. Virgin ESL. Resetting ETC (722.9) and ISM by diagnostic to the factory state without losing of SCN coding. Infra Red and password reader, Personalization, Activation, Coding. | ||
| ZN036 IS REQUIRED when purchasing the special function. | ||
| MN027 | FBS4 Manager | € 500 |
| This special function is dedicated to the latest generation Mercedes-Benz FBS4 (DAS) related modules. It allows the following for modules installed in Mercedes vehicles equipped with the FBS4 generation of DAS: | ||
| – Renewal of FBS4 control modules including 7G Tronic units 722.9. ALL BY OBD or internal CANBUS. | ||
| – Renewal of FBS4 CRD 3.X Engine Control Units. ALL BY OBD or internal CANBUS. | ||
| Both functions are performed using the new online Mercedes software. | ||
| MN028 | Instrument Cluster Data Manager, TV, ECU, Airbag Manager | €600 |
| – Updating data memory instrument clusters W221, W216, W219, X164, W164, W203, W251, W463, R171, W209, W220, W215, W169, W245, Smart (2007+), W204, X204, W212, W197, W207, W218,W168, W202, W140, W210, W211, W461, W208, W163, W230, Sprinter, Vito, Viano | ||
| – Modifying ASSYST and ASSYST PLUS service history records | ||
| – Updating data memory in Battery Control Module, Tyre Pressure Monitor, Electric Seat Adjustment Driver and Electric Seat Adjustment Passenger, Rear Signal Acquisition and Actuation Module 1, Electronic Stability Program (ESP), Airbag, Electronic Parking Brake, Vehicle Power Supply Control Module | ||
| – Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16 | ||
| – Service list update | ||
| – TV, AUX on/off configuration | ||
| – Managing stored crash data and configuration memory of electronic control unit | ||
| – Speed warning for Gulf States, reverse warning | ||
| MN00F | Full Mercedes-Benz special functions set MN026, MN027, MN028 | €2900 |
| Consists of all special functions for Mercedes-Benz vehicles. (This does note include the necessary hardware) | ||
| ABRITES Diagnostics for BMW, Mini | ||
| BN010 | Car Access System Advanced Coding | €1500 |
| Programming keys by diagnostic. Supported type of units are CAS1, CAS2, CAS3, CAS3+ | ||
| BN011 | Electronic Gearbox System synchronization | €1000 |
| Perform synchronization/recovery between CAS, EGS and ECU (6-speed gearboxes in E-series vehicles) and adaptation of 8-speed gearboxes in F-series vehicles | ||
| BN012 | Advanced Coding Functionality | €500 |
| Reading and programming vehicle order data, reprogramming flash memory of all electronic control units, E-series unit coding | ||
| BN013 | Key Preparation by dump of FEM/CAS4 | €1500 |
| Preparing keys by dump for BMW models with FEM/BDC and CAS4 immobilizer systems – newest BMW 1, 3, 5 GT, 6, 7, X3 series (body Fxx). Please note this functions also covers mileage reset in FEM/BDC modules in F-series BMW vehicles. | ||
| BN00L | BMW special functions set Lite BN010, BN011, BN012 | €2500 |
| ZN002 – PROTAG Programmer is required for key programming | ||
| BN00F | Full BMW special functions set BN010, BN011, BN012, BN013 | €3800 |
| Full set of special functions for BMW. ZN002 – PROTAG Programmer is required for key programming | ||
| ABRITES Diagnostics for Renault | ||
| RR011 | Engine Control Unit Advanced Diagnostic | €250 |
| Reading and updating flash and configuration memory of the ECUs. Clearing IMMO code data | ||
| RR012 | Key Programming | €1100 |
| Key programming functionality. Please note that this function also includes the RR015 special function. | ||
| RR014 | Airbags, UCH and EPS renewal | €300 |
| Allows clearing stored crash data in the unit produced from Temic and Continental (it supports units utilizing the CAN protocol). EPS and UCH renewal is also done using RR014. The function allows you to restore the modules to their factory virgin state and install a used module in a different vehicle. | ||
| RR015 | Key programming for the SMART 453/Renault Twingo III and other Renault models using the same system. | 350 |
| This function is designed to assist Smart and Renault specialists when a second key needs to be learned for these cars. The function requires at least one working key for the car to be present as ALL KEYS LOST is still not covered. | ||
| RR016 | Instrument Cluster Module Recalibration | 1000 |
| Reading and updating internal control module configuration memory by diagnostic | ||
| RR017 | Key programming for Renault Talisman/Megane IV/Scenic IV/Espace V | 1250 |
| Key programming functionality both for key addition and ALL KEYS LOST situations for Renault Talisman/Megane IV/Scenic IV/Espace V. RR012 is required for the purchase of this function. | ||
| RR00K | Special functions set for Renault key programming RR012, RR015 and RR017 | 2350 |
| Full set of key programming special functions for Renault vehicles. ZN002 PROTAG Programmer is required in order to obtain full functionality. | ||
| ABRITES Diagnostics for Peugeot, Citroen | ||
| PN009 | Engine Control Unit Advanced Diagnostic | 400 |
| Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. Service list update. | ||
| PN017 | BSI, Instrument Cluster Data Manager | 1380 |
| Update of Instrument Cluster and BSI working data including support for Delphi UDS BSI 2016+ | ||
| PN018 | PIN Manager | 1380 |
| Display PIN code – diagnostic access for all PSA vehicles including those with Delphi UDS BSI 2016+ | ||
| ABRITES Diagnostics for Ford, Mazda | ||
| FR005 | Instrument Cluster Module Recalibration | 330 |
| Reading and updating internal control module configuration memory by diagnostic. | ||
| FR008 | Key Manager, Advanced Diagnostic Functionality | 2000 |
| Key programming functionality , InCode calculator needed for adaptation of new electronic control units (and keys also). | ||
| FR009 | Airbag clear crash data and renew | 350 |
| This function allows the clearing of the crash data from the RCM module using 4 simple button clicks. Read, clear, write, clear DTCs. The function covers the RCMs using the following processor: XC23xx data flash | ||
| For FORD/Mazda/JLR and Volvo as well as Ford/JLR RCMs with the following processor: TMS470 + EEPROM 25320/25640 | ||
| ABRITES Diagnostics for Porsche | ||
| PO006 | Instrument Cluster/Engine Control Module Recalibration | 540 |
| Reading and updating internal control module configuration memory by diagnostic. Recalibration of control unit working characteristics ( time,mileage). | ||
| PO008 | Advanced Diagnostic Functionality | 700 |
| Coding, configuration, key programming, PIN code calculation. | ||
| PO009 | Module Adaptation | 500 |
| Allows the adaptation of modules both part of the Immobilizer system (Immo V) and those with component protection for Panamera, Cayenne 2011+, 911 991/Boxster 981, Spyder, Macan | ||
| ABRITES Diagnostics for Toyota, Lexus, Scion | ||
| TN007 | Advanced Key Programming by Diagnostics and key programming | 1000 |
| Key programming functionality. Immobilizer/Smart system reset by diagnostic. Master key preparation by dump of smart system. Identification Control Unit reset by LIN bus. Master key emulation for all models with smart keys. Emergency start in all keys lost situations. | ||
| ZN039-2 IS REQUIRED when purchasing the special function. | ||
| ABRITES Diagnostics for Fiat, Alfa, Lancia | ||
| FN013 | Instrument Cluster Data Manager | 500 |
| Update of Instrument Cluster working data. | ||
| FN014 | Engine Control Unit Flash Manager | 205 |
| Reading and Updating ECU’s flash memory by diagnostic. ECUs supported: IAW 4AF,4EF,59F,5AF,5AM,5NF, 5SF3; MJD 6JF | ||
| FN015 | Engine Control Unit Configuration Manager | 575 |
| Reading and Updating ECU’s configuration memory by diagnostic. Reset to factory new state option. ECUs supported: EDC15C5, EDC15C7, MJD 6JF/8F2; Marelli IAW 4AF, 4EF, 59F, 5AF, 5AM, 5NF, 5SF3, 5SF8; BOSCH ME7.3H4 (boot), ME7.3.1 (boot). | ||
| FN018 | PIN and Key Manager for FCA vehicles | €1500 |
| Key programming. Transponders/Keys preparation. BCM – Configuration data read and update, PIN, component protection data display. Remote control programming. Includes support for Alfa Romeo Giulia/Stelvio | ||
| ABRITES Diagnostics for GM (former Opel, Vauxhall) | ||
| ON010 | Engine Control Unit Flash Manager | €205 |
| Reading and Updating ECU’s flash by diagnostics (OBDII). | ||
| ON013 | PIN and Key Manager | €1100 |
| PIN code calculation and key programming functionality, reading and updating of ConfData of ECU, instrument clusters and BCM units. | ||
| ON014 | Advanced Configuration | €450 |
| Calibration of instrument cluster and engine control module data, reset of airbag data (for certain models), extraction of radio PIN code by diagnostics (OBDII). | ||
| ABRITES Diagnostics for Mitsubishi | ||
| MI005 | Engine Control Unit Flash Manager | 165 |
| Reading and Updating ECU’s flash and configuration memory by diagnostic.ECU EDC15 | ||
| MI007 | PIN and Key Manager | 450 |
| PIN code calculation and key programming functionality. | ||
| ABRITES Diagnostics for Subaru | ||
| SB001 | Subaru Key learning and smart system reset | 700 |
| Key learning for keyless and mechanical key Subaru cars even when all keys are lost. By OBD, no disassembly needed. Smart system reset is also possible.The function allows you to adapt new and used ECU (ECM) and Smart ECM | ||
| ABRITES Diagnostics for Nissan | ||
| NN006 | PIN and Key Manager | 550 |
| Calculation PIN code (including 20-digit PIN Code) and programming keys by diagnostic. | ||
| ABRITES Diagnostics for Hyundai, Kia | ||
| HK007 | Instrument Cluster, Engine Control Data Manager | 300 |
| Update of Instrument Cluster working data, Flash read/update for ECUs EDC15C2, EDC15C2 configuration memory update. | ||
| HK008 | PIN and Key Manager | €650 |
| Key programming for all vehicles with smart keys (2018+). PIN code display for vehicles with mechanical keys – Delphi, KEFICO, EDC15/16. Flash Read/update for ECUs EDC16. | ||
| ABRITES Diagnostics for Volvo | ||
| VL003 | Instrument Cluster Data Manager | 500 |
| Update of Instrument Cluster working data. | ||
| VL004 | HITAG 2 Key Learning and Central Car Configuration | 500 |
| Key learning for HITAG 2 PCF7945/7953 type of keys for 2008+ cars | ||
| ABRITES Diagnostics for Jaguar and Land Rover | ||
| JL002 | Key learning | 150 |
| Key programming functionality. | ||
| JL003 | Mileage recalibration | 150 |
| Update of Instrument Cluster working data. | ||
| ABRITES Diagnostics for Chrysler, Dodge, Jeep | ||
| CR006 | Instrument Cluster Data Advanced Configuration | 500 |
| Reading and updating configuration memory instrument clusters. | ||
| CR007 | Engine Control Unit Flash Manager | 165 |
| Reading and Updating ECU’s flash and configuration memory by diagnostic. ECU EDC15/16 | ||
| ABRITES Tag Key Tool – software for TAGPROG/PROTAG | ||
| KT010 | Tag Key Tool | Free for all owners of ZN002 |
| This software will provide you access to the internal memory and configuration of transponders.Available tool for generation of keys by dump of immobilizer system of the vehicle (more than 1000 models are covered).Provided is the ability for preliminary preparation of transponders to be ready for usage with diagnostic equipment.Available functionality for cloning of Megamos 13, Temic 11, Temic 12, Texas 4C, PIT ID33, Tiris 4D, Tiris 4E, Temic 8C (Mazda, Ford, Proton). | ||
| KT011 | Key Inspector | 1000 |
| Utility for displaying information from different keys (VIN, last drive, mileage,..). | ||
| KT012 | Porsche BCM | 300 |
| Key programming by dump from the Electronics Body Front Section control unit (with Motorola MCU inside – 9S12XDP512, XEP100) | ||
| ABRITES ECU Programming Tool | ||
| EP001 | Bosch EDC17/MED17, Delphi and SIMxx boot mode manager | 500 |
| Programming tool dedicated to reading/writing/updating of the Configuration Data (EEPROM), Internal and External Flash of Bosch EDC17/MED17, Delphi and SIMxx by boot mode. | ||
| ABRITES Diagnostics for Bikes, Snowmobiles, Water scooters | ||
| BK002 | Advanced bike diagnostics, BMW bikes keyprogramming | 400 |
| ABRITES Diagnostics for DAF | ||
| DF002 | Key Programming | 600 |
| Key programming functionality. | ||
| Emulators | ||
| # | Product Description | Price |
| EM001 | ABRITES ESL Emulator for Mercedes | 50 |
| By using the switches on the emulator, you can benefit from a 3-in-1 solution that supports the following models: W203, W204, W207, W208, W209, W210, W211, W212, W169, W245, Vito, Viano and Sprinter. This is a plug and play solution for most models. You can use the ABRITES Software for Mercedes to personalize the emulator (FREE OF CHARGE, NO TOKENS – available for all AVDI owners with valid AMS and special function MN026) or you can personalize the emulator with a green key in the same way as an original ESL (necessary ONLY for W204, W207 and W212). | ||
| 5 pcs x EM001 – ABRITES ESL Emulator for Mercedes | 225 | |
| 10 pcs x EM001 – ABRITES ESL Emulator for Mercedes | 400 | |
| 20 pcs x EM001 – ABRITES ESL Emulator for Mercedes | 700 | |
| EM002 | ABRITES ESL Emulator for Renault | 30 |
| The ABRITES ESL emulator for Renault vehicles (EM002) is one of the most advanced ESL emulators currently available. The ABRITES ESL emulator is part of the all new ABRITES design, manufacturing and development process which allows the whole emulator unit to be designed, developed and produced in-house by us. The currently supported models include Renault Megane II, Megane III, Laguna III, Scenic III, Clio IV and Fluence. | ||
| 10 pcs x EM002 – ABRITES ESL Emulator for Renault | 250 | |
| EM003 | Immo Parts Emulator for VAG | 40 |
| Used to emulate any IMMO part while emulating using VN005. | ||
| 10 pcs x EM003 – Immo parts emulator for VAG | 300 | |
| EM004 | ABRITES Video in Motion CAN Filter 125k | 40 |
| The CAN filter allows the unlocking of video playback in a moving vehicle in cases when this option is not available in the diagnostic coding options of the vehicle. This filter works with W166/W292 vehicles with NTG5s1 multimedia module (Panasonic). | ||
| 10 pcs x EM004 – ABRITES Video in Motion CAN Filter 125k | 300 | |
| EM005 | ABRITES Video in Motion CAN Filter 500k | 40 |
| The CAN filter allows the unlocking of video playback in a moving vehicle in cases when this option is not available in the diagnostic coding options of the vehicle. This filter works with W221/W216 vehicles with NTG3.5 multimedia module. | ||
| 10 pcs x EM005 – ABRITES Video in Motion CAN Filter 500k | 300 | |
| EM008 | Odometer calibration emulator for W204, W205, W212 (FBS3/FBS4) | 35 |
| The odometer calibration emulator allows mileage calibration for W204, W205 and W212 vehicles (both FBS3 AND FBS4). | ||
| 10 pcs x EM008 – Odometer calibration emulator for W204, W205, W212 (FBS3/FBS4) | 300 | |
| EM009 | Odometer calibration emulator with jumper cable for dash for W204, W205, W212 (FBS3/FBS4) | 40 |
| The odometer calibration emulator allows mileage calibration for W204, W205 and W212 vehicles (both FBS3 AND FBS4) and has jumper cable for the dash for easier installation. | ||
| 10 pcs x EM009 – Odometer calibration emulator with jumper cable for dash for W204, W205, W212 (FBS3/FBS4) | 300 | |
| Keys | ||
| # | Product Description | Price |
| TA6 | PCB (BCM2) – 868 Mhz | 50 |
| 10 pcs x TA6 – PCB (BCM2) – 868 Mhz | 400 | |
| TA20 | PCB (BCM2) – 433 Mhz | 50 |
| 10 pcs x TA20 – PCB (BCM2) – 433 Mhz | 400 | |
| TA8 | PCB (BCM2) – 315 Mhz | 50 |
| 10 pcs x TA8 – PCB (BCM2) – 315 Mhz | 400 | |
| TA9 | Abrites key (BCM2) – 868 Mhz | 40 |
| 10 pcs x TA9 – Abrites keys (BCM2) – 868 Mhz | 320 | |
| TA10 | Abrites key (BCM2) – 315 Mhz | 40 |
| 10 pcs x TA10 – Abrites keys (BCM2) – 315 Mhz | 320 | |
| TA11 | Abrites key (BCM2) – 433 Mhz | 40 |
| 10 pcs x TA11 – Abrites keys (BCM2) – 433 Mhz | 320 | |
| TA12 | PCB for Mercedes IR key fob case with chrome. Frequency – 433 Mhz | €25 |
| 10 pcs x TA12 – PCB for Mercedes IR key fob case with chrome. Frequency – 433 Mhz | €200 | |
| TA21 | PCB for Mercedes IR key fob case with chrome. Frequency – 315 Mhz | €25 |
| 10 pcs x TA21 – PCB for Mercedes IR key fob case with chrome. Frequency – 315 Mhz | €200 | |
| TA13 | PCB for Mercedes IR key fob case small size. Frequency – 433 Mhz | €25 |
| 10 pcs x TA13 – PCB for Mercedes IR key fob case small size. Frequency – 433 Mhz | €200 | |
| TA22 | PCB for Mercedes IR key fob case small size. Frequency – 315 Mhz | €25 |
| 10 pcs x TA22 – PCB for Mercedes IR key fob case small size. Frequency – 315 Mhz | €200 | |
| TA14 | Abrites KEY for all types Mercedes with IR. Frequency – 433 Mhz | €30 |
| 10 pcs x TA14 – Abrites KEY for all types Mercedes with IR. Frequency – 433 Mhz | €240 | |
| TA15 | Abrites KEY for all types Mercedes with IR. Frequency – 315 Mhz | €30 |
| 10 pcs x TA15 – Abrites KEY for all types Mercedes with IR. Frequency – 315 Mhz | €240 | |
| TA16 | Abrites KEY-CARD for Renault vehicles | €30 |
| 10 pcs x TA16 – Abrites KEY-CARD for Renault vehicles | €240 | |
| TA19 | Abrites Electronic key head (Renault/Dacia) | €30 |
| 10 pcs x TA19 – Abrites Electronic key head (Renault/Dacia) | €240 | |
| TA23 | Abrites Electronic key head with remote control (Renault/Dacia) | €35 |
| 10 pcs x TA23 – Abrites Electronic key head with remote control (Renault/Dacia) | €280 | |
| TA24 | Abrites Chrysler/Dodge/Jeep 2013+ Key | €50 |
| 10 pcs x TA24 – Abrites Chrysler/Dodge/Jeep 2013+ Key | €400 | |
| TA27 | Megane 3/Laguna 3 key PCB | €55 |
| 10 pcs x TA27 – Megane 3/Laguna 3 key PCB | €440 | |
| TA28 | Clio 4/Captur KEYLESS key PCB | €35 |
| 10 pcs x TA28 – Clio 4/Captur KEYLESS key PCB | €280 | |
| TA29 | Abrites FIAT 500X KEYLESS key | €50 |
| 10 pcs x TA29 – Abrites FIAT 500X KEYLESS key | €400 | |
| ТА30 | Abrites DST-AES transponder emulator | €30 |
| 10 pcs x TA30 – Abrites DST-AES transponder emulator | €240 | |
| TA31 | Abrites extractor | €25 |
| 10 pcs x TA31 – Abrites extractor | €200 | |
| TA34 | Abrites Renault Megane 4/Talisman KEYLESS key | €60 |
| 10 pcs x TA34 – Abrites Renault Megane 4/Talisman KEYLESS key | €480 | |
| TA35 | Abrites Renault Clio 4/Captur KEYLESS key | €40 |
| 10 pcs x TA35 – Abrites Renault Clio 4/Captur KEYLESS key | €320 | |
| TA36 | Abrites DST 40bit/DST+ 80bit Electronic key head | €30 |
| 10 pcs x TA36 – Abrites DST 40bit/DST+ 80bit Electronic key head | €240 | |
| TA38 | IC Replacement for Alfa Romeo Giulia/Stelvio | €40 |
| 10 pcs x TA38 – IC Replacement for Alfa Romeo Giulia/Stelvio | €320 | |
| Additional Cables and Adapters | ||
| # | Product Description | Price |
| ZN031 | ABPROG EEPROM/BCM adapter | €100 |
| Adapter for ABPROG programmer. It allows programming of EEPROMs – M35xxx/I2C/SPI/MicroWire. This adapter is a part from ABPROG programmer (ZN030). | ||
| ZN032 | ABPROG NEC adapter with socket | €50 |
| The adapter is intended for ABPROG programmer ZN030 to be used with NEC MCUs from Mercedes IR-keys. | ||
| ZN033 | ABPROG NEC adapter | €10 |
| The adapter is intended to be used with the ABPROG Programmer ZN030 for reading NEC MCUs from Mercedes IR-Keys by soldering the MCU to the adapter. | ||
| ZN034 | ABPROG Flat Cable | €5 |
| The adapter is intended to be used with the ABPROG Programmer ZN030 to read CPUs and MCUs. | ||
| ZN036 | IR AVDI cable | €50 |
| Cable for reading data from EIS through Infra Red | ||
| ZN037 | Renault CAN adapter | €20 |
| Adapter for diagnostics of all multimedia modules present in the car (Radio, Navigation, Bluetooth, Telephone, e.t.c) | ||
| ZN038 | Fiat/Chrysler CAN adapter | €20 |
| Diagnostics adapter for ABS (Anti Lock Brakes), HALF (Haptical Lane Feedback), ESL ( Electronic Steering Lock), ORC (Occupant Restraint), EPS (Electric Power Steering), PAM (Parking Aid Module) present in Fiat 500x and Jeep Renegade | ||
| ZN039-2 | Toyota Transponder Emulator | €50 |
| Transponder emulator required to complete the key learning/emergency start procedures part of the TN006 special function. You NEED to have TN006 active in order to use the emulator. | ||
| ZN040 | A6/A7/A8 CAN Adapter | €50 |
| The Abrites A6/A7/A8 CAN Adapter is used in order to make the ALL KEYS LOST procedure for Audi A6/A7/A8 easier providing all necessary connections. | ||
| ZN046 | Abrites Key Renewal Adapter | €10 |
| The Abrites key renewal adapter is a new product which assists when you need to renew a Hitag 2 type of key. It is soldered to the Hitag 2 PCB and it is then attached to the ABPROG programmer in order to renew used HITAG 2 keys. | ||
| ZN047 | Abrites Renault key card type field detector | €15 |
| The Abrites Renault key card type field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. This field detector provides the customer with a reassurance before starting to work on a certain car The ZN047 is activated at 125KHz to confirm the operation of the unit. It indicates that a field is detected by a green light from the LED inside and it is shaped as a Renault key card in order to fit in the key-card slot of modern Renault vehicles. | ||
| ZN048 | Abrites universal field detector | €15 |
| The Abrites universal field detector has been developed in order to assist when testing to confirm whether or not the electronic ignition switch is functional before starting work. It detects a field of 125KHz and also a field of 20KHz so that it can be used for multiple brands of vehicles Such as Mercedes, Audi, Toyota and other brands which use these frequencies. | ||
| ZN049 | AVDI Adapter for connection with K-Line BMW vehicles (PassThru ONLY) | €20 |
| Adapter used to connect to K-Line BMW vehicles when using OEM software via the AVDI PassThru driver | ||
| ZN052 | Abrites cable set for adapting IMMO parts used together with VN005 | €50 |
| ZN053 | AVDI Extractor Cable | €50 |
| ZN054 | Extension cable set for direct CAN connection for VAG vehicles | €20 |
| ZN055 | ZN055 – EWS Adapter for ABPROG | €30 |
| ZN062 – 12V/0.5A DC Power adapter IS REQUIRED and is not included in the package | ||
| ZN056 | Honda K-Line adapter | €10 |
| ZN057 | EEPROM wire extender for ABPROG EEPROM/BCM adapter | €10 |
| Wire extender for the EEPROM/BCM adapter to be used for reading chips without having to take them off the PCB. | ||
| ZN058 | V850E2 adapter for ABPROG | €10 |
| Adapter used to read the V850E2 single-chip microcontroller using the ABPROG programmer. | ||
| ZN059 | VAG VDO Cluster Adapter | €50 |
| Adapter used to enter service mode for VAG VDO dashboards. ZN063 – 12V/1A DC Power adapter IS REQUIRED and is not included in the package | ||
| ZN060 | VAG Micronas (new style connector) Cluster Adapter | €50 |
| Adapter used to enter service mode for VAG Micronas dashboards with the new style connector. ZN063 – 12V/1A DC Power adapter IS REQUIRED and is not included in the package | ||
| ZN061 | VAG Micronas (old style connector) Cluster Adapter | €50 |
| Adapter used to enter service mode for VAG Micronas dashboards with the old style connector. ZN063 – 12V/1A DC Power adapter IS REQUIRED and is not included in the package | ||
| ZN062 | 12V/0.5A DC Power adapter | €10 |
| 12V/0.5A DC Power adapter used to give power supply to the ZN055 – EWS3 Adapter for ABPROG | ||
| ZN063 | 12V/1A DC Power adapter | €10 |
| 12V/1A DC Power adapter used to give power supply to the following products: | ||
| ZN059 – VAG VDO Cluster Adapter | ||
| ZN060 – VAG Micronas (new style connector) Cluster Adapter | ||
| J1850 | SAE J1850 adapter for AVDI | €40 |
| Adapter will allow diagnostic operation with SAE J1850 based diagnostic protocols used in the past from Chrysler, Dodge, Jeep, Plymouth, Ford. | ||
| CB002 | AVDI cable for 20 pins round diagnostic connector for BMW | €20 |
| CB003 | AVDI cable for 38 pins round diagnostic connector for MERCEDES | €20 |
| CB004 | AVDI cable for 14 pins round diagnostic connector for MERCEDES Sprinter | €20 |
| CB005 | AVDI cable for ESL(ELV) for Mercedes | €20 |
| CB006 | AVDI cable for instrument cluster Mercedes W203, W209, W211, W219 | €20 |
| CB007 | AVDI cable for Bombardier diagnostic connector | €25 |
| CB008 | AVDI cable for BMW bike diagnostic connector | €25 |
| CB009 | AVDI cable for connection with trucks Deutcsh 6 pin (J1708) | €25 |
| CB100 | AVDI OBDII cable (SAE J1962) | 15 |
| CB101 | AVDI extension cable for PROTAG | €10 |
| This cable is a part of PROTAG and ABPROG programmers (ZN002, ZN030) | ||
| CB102 | EXT cable for 25 pin F/M | €10 |
| CB103 | OBDII Y cable M/2xF | €20 |
| CB104 | USB A-B Cable | €5 |
| Cable used to connect the AVDI and PROTAG programmer to the computer | ||
| CB201 | AVDI cable for connection with Suzuki Marine Engines type 1 | €20 |
| CB202 | AVDI cable for connection with Suzuki Marine Engines type 2 (round) | €20 |
| CB203 | AVDI cable for connection with Yamaha Marine Engines | €25 |
| CB204 | AVDI cable for connection with Evinrude Marine Engines | €25 |
| CB205 | Evinrude Flash Update cable | €20 |
| CB301 | AVDI cable for connection with Aprilia Bikes | €15 |
| CB302 | AVDI cable for connection with KTM Bikes | 20 |
| CB303 | AVDI cable for connection with Benelli Bikes | €20 |
| CB304 | AVDI cable for connection with Suzuki Bikes (6 pins) | €25 |
| CB305 | AVDI cable for connection with Harley Davidson Bikes (CAN/K-Line) | €40 |
| CB306 | AVDI cable for connection with Piaggio Bikes | €25 |
| Abrites Tough Cases | ||
| # | Product Description | Price |
| ATC01 | Abrites Tough Case – Small size | €35 |
| ATC02 | Abrites Tough Case – Medium size | €90 |
| ATC03 | Abrites Tough Case – Large size | €120 |
Visited 1 times, 1 visit(s) today