This instruction show the guide on how to use Zed-Full immobilizer system to do all key lost programming for Mercedes Benz W204 W207 W212(old).And for more Benz key programming check here:Mercedes Benz Key Programming Projects.
Procedures:
Select “MB-IR-PROG”
Select “Program”
Select “Lost Key” and click “Continue”
Select “SERVER BGA/FBS3”
ZFH-MCA,Zed-NET,ZFH-UTE adapter are also required for this application
Connect “ZFH-C16” cable to “Zed-Full” EXTERNAL Port
Connect “Zed-NET” to ”ZFH-MCA” adapter
Connect “ZFH-C10” cable to “ZFH-MCA” adapter.
Also connect “ZFH-C10” cable to “IR-PROG”
Connect “ZFH-C15” cable to “ZFH-MCA” adapter and also connect “ZFH-C15” cable to “ZFH-UTE”
Click “Continue”
Press “Select System(C09/ZFH-MBCA)”
Connect “ZFH-MBC1” cable to “ZFH-MBCA” adapter and insert “ZFH-MBCA” adapter to Zed-Full “OBD2 Dongle” socket
Connect “ZFH-MBC1” cable to EZS/EIS module socket
Ensure that all connections are done properly and select “CLASS E W207” option,then press “Continue” button
ESZ/EIS unit has been read,press “Continue” button
“ZFH-MCA” connections have already been done.Now put “ZFH-UTE” to EZS/EIS unit(ignition) and press “Continue” button
“Zed-NET” has already been connected to this WiFi network,so not need to enter password again.Just press onto “ON” button to active “Zed-NET”
Zed-FULL is connecting to iEA SERVER to make Hash calculation
For password calculation “ZFH-UTE” must be connected to EZS/EIS unit.To start process press on “Continue” button
Then it will take about 30 minutes to calculate password,please wait…
Password calculated!
If password calculation fails,Zed-FULL will continue the process automatically till calculating password.After password calculation,key list will be viewed on Zed-FULL screen.
In case programming a new key on a “Used” marked slot,new programmed key will start the car but same slot old key will not.
Select “EA Key(IR)”put “EA” version key to “IR-PROG” and press “Program” button
