How to Change BMW F-series coding Values

Easy step by step guide on how to change bmw f-series coding values.In this article i will show the detail to change bmw f10 coding values with BMW Coding Software E-sys.

Too you need:

1.BMW ENET(hardware,run BMW Coding Software E-sys)

2.BMW Coding Software E-sys.

3.PSdZ Data V50.3

4.A Laptop running window xp home.

Change bmw f-series coding values procedure:

1. Connect the ENET (Ethernet toOBD) cable with vehicle via OBD socket
   Wait until LAN network adapter in task bar has established limited network capacity
   3. Open ZGW-SEARCH.exe
   4. Open E-sys software
   5. Click the connection icon
   6. Select your F series model, selection Connection via VIN and click continue
   7. Follow system prompt. Click “Read(VCM)”
   8. Select CADF with a green check mark file under the module you want to read, select “Coding Read Data”
   9. Close error report windows pops up
   10. New option under CADF, a folder. Expand the folder and right click the file, select “EDIT FDL”
   11. Browse the folder, you will find your option, for example KOMFORTSCHLIESSUNG-FB
   12. Factory option set to nicht-active. Right click, select “Edit”
   13. Then click werte value, click “Edit”

14. The option to change the value in the lower window. Change current value with new, click the button on the right

15. Change werte value==00 to werte value==FF, save settings

16. Open same file under “File Name”. It shows file name and location

17. The E-SYS software display new value name and werte value

18Save settings
19. Right click FA, select “Activate FA”
20. Select CAFD file you just edited and select “CODE DFL”
21. When DFL coding completed. Close the error report windows.
22. Werte value changing procedure now is completed.
23. Exit the BMW E-sys software and disconnect the ENET interface from vehicle.