This short instruction will show you how to quick&easy clean dirty car engine in five minutes on Subaru.
More professional cleaning procedure please click here:
How to Clean Engine Safely Step by Step on Subaru
Procedures:
The first thing you need to do is pick the right cleaning.
We choose P21S total auto wash, you can get 5L size and putting in that little hand pump sprayer, or you can also buy it in a smaller 1L size if you don’t need so much.
Ensure engine is cool
Use a bag cover Alternator
Spray the total auto wash all in the engine compartment
Leave on for 1 minute
Then use a regular garden hose with cold water rinsing the product off
Noted do not use pressure washer
After rinsing, take bag off, use a shop vac exhaust to blow off water, you can use an air compressor or anything that can direct air
Use a rag to wipe down the plastics especially the ones that have flat surfaces to get any remaining water
Start the engine, you’re going to see a little of water fly off those belts and pulleys.
Close the hood and take 10 minutes or longer drive to finish the drying.
Cleaning procedure is done.