Mercedes Benz Xentry 7,9 & 12/2014 Installation Guide

This article show a guide on how to make a full installation for Mercedes Benz Xentry 7/2014 — 9/2014—12/2014.This guide made to be detailed and simple as possible to help a broad spectrum of readers,experiment readers can skip or modulate some steps and for newbie this guide must be followed step by step

This guide consists of 7 phases,include:

XP fresh installation,

Preparation for Xentry installation

Preparing installation DVDS

DVD1 Xentry installation

DVD2 Xentry installation

fixes and config. Phase

EPC net and WIS\ASRA and SDmedia installation

Source:http://www.car-auto-repair.com/wp-content/uploads/2018/06/Sources.txt

And Here are Some Similar Contents:

How to Install Xentry XDOS 2023.06 on Win10

06.2023 Benz Xentry.OpenShell.XDOS Free Download

Software requirements:

XP service pack 3 source
partition manager
virtual drive program
winrar
adobe reader 10 or more (installation saves ur time)
Drivers of ur laptop 🙁 original)…attached file contains dell 630 drivers
inx modified files specific to ur version
xentry 2 DVDs (original or modified)
EPC 9 2013 base database
EPC 7 2014 update (last according to time of doc. editing)
WIS 7 2014 full (last according to time of doc. editing)
Sdmedia 1 2014
Fixes (bin fix / blacklists/ pic. fix) according to ur version
Key generators
Framework 2.0 and 3.5 sp1 ( saves ur time)
Active Iso maker

Attachment in the post contains many sources above…Search forum for Xentry DVDs, EPC, WIS/ASRA and Sdmedia sources in automotive software section of the forum.

______________________________________________________________________________________

Installation guide:

Phase 1: (XP fresh installation)…..approx: 75 min s

insert bootable XP SP3 CD
enter bios setting and make boot from CD first choice
install win XP with following considerations in order:

Delete ur partitions if already ur HDD is partitioned…
create partition in un partitioned space c : at least 20 GB
install win in c: partition after formatting drive in NTFS””not quick””
create two accounts : the first is STAR , the second OWNER
login to both accounts
restart ur system
login to STAR
Install partition manager (see sources)
partition as follows (120GB HDD is minimum requirement) :

D: 3 GB

E: 50 GB

F: 35 GB

Note: letters are extremely important..NTFS is mandatory…use Default allocation size

Restart is required to apply partitions by partition manager program…
Login to STAR…Open My computer…format partitions again..now u can use quick format don’t forget NTFS and Default allocation size.
install drivers correctly
Go to control panel<system<hardware<Device manger to confirm that no device hasn’t installed..If u find a device not known install its’ driver..
Restart system as required by some drivers..
After that install: Adobe reader /Virtual clone program /winrar.
NOTE: if you have the enough experience u can save the time and do partitions as follows from the start in XP setup:
C : at least 20 GB

D: 3 GB

E: 50 GB

F: 35 GB

Phase 1 completed 🙂

______________________________________________________________________________

Phase 2: (Preparation for Xentry installation)….approx. 5 min s

Go to Newguide2j file(see sources)
click WFP switch (stands for Windows File Protection)
restart ur system as required to apply settings
Logging to Star account.
Go to Newguide2j
Click prepare batch (follow commands..10 steps will be executed)..system will be restarted
Login to Star..u will find Star Utilities in ur desktop

Phase 2 completed 🙂

______________________________________________________________________________

Phase 3: (Preparing installation DVDS)..Skip this if u already downloaded trusted modified DVDS to phase 4 ….approx. 30 min s

THE KEY TO INSTALL THIS SOFTWARE IS Setup.inx file trick:

you must create a DVD with the amended file Setup.inx, by replacing file setup.inx with the one on the DVD so you can run the software Be CAREFULL HERE!!

Follow steps bellow:

Go to ur DVD 1…right click..extract the DVD1 IN A FILE ON YOUR LAPTOP DESKTOP

Go to Setup modified folder..(According to ur version..See sources).
Copy the setup.inx file and notice its folder name
Return to the extracted DVD1 folder
Find the folder name similar to that in Setup modified folder
Paste the setup.inx TO REPLACE THE OLD FILE
Will say there is same file name and size..click replace
Do the same for DVD2.

Convert both back to Iso format (use Active iso program..see sources)
follow steps :

Open Active iso maker program
Select New iso
Use UDF option.
DRAG all the content of the replaced setup.inx files DVD to the root in the program (extremely important) i prefer to use Ctrl+A to select all files then drag them to the program(Active iso program)
Save files with name DVD1 for 1 and DVD2 for 2

By the end u have 2 new modified iso files READY TO INSTALL THE SOFTWARE

Phase3 completed 🙂

New break through:
now u can make ur machine with appid 250 as original xentry kits so u can skip this phase and go immediately to phase 4:

that is so easy and time saving thanks to people worked them..click here :

http://mhhauto.com/Thread-DAS-Xentry-Multi-Solution-2014?pid=351190

______________________________________________________________________________

Phase 4: (DVD1 Xentry installation) ….approx. 75 min s

Set time to month after ur DVD release
Go to STARTUTILITIES in desktop.. click star key center
Insert keys for Xentry and WIS and Das with the following considerations:

Use key gens provided in sources.
BE aware to tick expiry date for the keys and set it forward eg. 01/01/2020
BE aware in xentry key to set the start day to 2 days before ur system date
keys need information as Hardware id and App id and LAN id….Copy them correctly form the startkey to generate the right key
click save
if it is correct and saved u will notify that validity appeared after clicking save

mount DVD1
explore mounted dvd1/STARDIAG
click setup
Setup will start
Choose Lang.
Wait 🙂 and follow instructions ordinary
Setup will pop up that no startkey click yes…setup will launch StartKey with new appearance
Insert new key using Xentry key generator BUT NOW Appid is 253 and NEW hardware id…Save key…
Exit start key
Setup will continue….

NOTES:

Setup will need to restart..This is ordinary..after restart launch setup again as previous if not launched automatically
Error will appear during antivirus update..close the small window and ignore that error
if windows protection appears because u don’t follow the guide strictly read the message carefully and let the program to replace the original windows files
Plug computer to power source…if u don’t the setup will be terminated!
New login will appear … wait…don’t switch of lap.
Steps 10,11,12 will not happen if u use the New brake through of appid 250

DVD1 complete successfully and setup will require DVD2 after restart

Phase 4 completed 🙂
______________________________________________________________________________

Phase 5: (DVD2 Xentry installation) ….approx. 150 min s

mount DVD2
Explore DVD2 < STARDIAG
Click setup
Setup will start
WaitJ
Setup will complete and require YOU to click finish to restart…DON’T CLICK FINISH!!
Go to Newguide2j
Click after installation patch
Return to Xentry setup and now click finish..System will restart and hot fixes installation begin
Wait until hot fixes finish then system will be completely loaded

NOTE:

Setup will need to restart…This is ordinary..after restart launch setup again as previous if not launched automatically

Phase 5 completed 🙂
Now you have XENTRY… 🙂

______________________________________________________________________________

Phase 6: (fixes and config. phase)…approx. 15 min s

Navigate to: Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and select Properties.

Go to Port Settings tab and set these values:

Bits per second: 115200

Data bits: 8

Parity: None

Stop bits: 1

Flow Control: None

Then click on Advanced… button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.

Press OK and close Device manager.
THIS for Part D

Apply pic.fix
Apply bin fixes (search the forum according to ur version).
Apply blacklist (search the forum according to ur version).

Phase 6 completed 🙂

_____________________________________________________________________________

Phase 7: EPC net and WIS\ASRA and SDmedia installation …Approx. 150 min s

Mount to virtual DVD : EPC of the latest update(7 2014)
Click startNOTE: in this stage EWA server is installing and also java follow instructions appear to u.Now open EWA Admin tool and insert EPC and WIS startkey in startkey tab (keys are provided in our forum by friendly members.
Back to EPC tab…Click install EPC…
___NOTES:
the installation will request a base line source of 9 2013 EPC..Mount them according to the DVD tag file required..Make sure to mount the requested DVD..otherwise u will face a problem of (no installation medium),,in case of iso made by you if u mistake in the iso creation that u put all folder as a root u will face the problem also(simple mistake with huge effect of failure)Now EPC 7 2014 with base line 9 2013 installed.
Go to EWA net..User and pass is admin…change ur pass
Note…From here download and follow EWA net installation guide..If ur successful EPC icon appears in programs…click here:http://www.car-auto-repair.com/benz-new-epc-ewa-net-keygen-key-generator-free-download/
Here is the trick…Go to EWA admin tool to install WIS…Click preferences>Extended functionality…new tab will be added..
Click WIS update and flow the instructions and required DVDsNOTE: it will check installation media compatibility and requires EPC DVD to check compatibility…
Then it requires the 2 WIS DVDGo to EWA page log again and do the same done for EPC…WIS icon appears..Click on it and ENJOY!!

Visited 1 times, 1 visit(s) today