What is InPower?
InPower is a special diagnostic software for Cummings generators.You are able to use it to communicate with Cummings generators electronic controls units (ECU/ECM).
InPower Functions:
Direct connection capability from a personal computer to PowerCommand geneset controls,transfer controls,and system controls;For details on devices supported refer Technical Details tab.
Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
Configurable for units of measurement, and level of user access (read only, read/change values,administrator).
Generates reports of monitored data
Connection to generator set or transfer switch controls via modem or to multiple controls via PowerCommand (LonWorks)network.
Allows released firmware upgrades on Power Command genset controls.
Allows the monitored equipment to send alarm information to a connected computer.
Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.
Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
Viewing of equipment history, fault codes, and data associated with fault codes.
Convenient programming of configurable inputs in the controllers.
InPower Support Systems:
Windows 7,Windows 8,Windows 10 and Windows 11
InPower Software and hardware requirements:
InPower is suitable for use with Microsoft Windows 2000,
Windows XP Pro and Windows NT v6.0. InPower v6.0 does not support Windows 95 or Windows 98 operating systems. See below for further requirements.
• An IBM PC or 100% IBM compatible PC.
PC with Windows 2000:
Minimum 300 MHz processor
Minimum of 128 MB RAM
PC with Windows XP Pro or Windows NT v6.0:
Minimum 500 MHz processor
Minimum 256 MB RAM 1.5 GB hard drive
• Microsoft Internet Explorer v5.5 or higher
• SVGA (1024 x 768) color display
• Windows compatible pointing device and 1010 key enhanced keyboard.
• 16X CD-ROM
• InPower Pro version requires one parallel port or one USB port depending on dongle type.
• One free serial communications port.
InPower Typical screens
InPower operates on the popular Windows ® Explorer format, allowing quick access directly to desired program parameters.
Set points are changed by simply double-clicking on the appropriate parameter, typing in the desired value and clicking on enter to change the parameter. The range of acceptable values is displayed by the program.
InPower allows continuous monitoring of selected values at an operator selected interval. This function is convenient for testing or monitoring of exercise periods.
Data can be exported to files compatible with 3 rd party spreadsheet and database programs such as Microsoft Excel.
Another function that is useful for testing is the strip chart recorder. The strip chart recorder continuously monitors selected values and displays them graphically for the operator’s use. The strip chart function allows monitoring of transient voltage and frequency conditions and other
AC data to verify generator set performance without use of expensive and complicated test equipment.
InPower 14.5 Pro with INCAL 2023.11 Free Download:
Newest InPower v14.5 Pro +INCAL 2023.11 100% Work
InPower Pro v12.5.2 download
https://mega.nz/file/gXQmFCJA#0ImSMvtpisGnEA-BGFRZT4oxciMrNIRwGl_2ihwddxY