Carprog Read Opel ECU Data Knowledage - Auto Repair Technician Home

This article show some knowledge about Carprog Opel ECU reading,include:how to connect carprog to different Opel ECU,supported ECU type.

OPEL login reader from motor hybrid ECU. Works by OBDII connector using cable A1, or removed from car using cable A15. On-table connection wiring diagram you can find in user manual.

This CarProg Opel ECU reader you can use in these cases:

Use it like Opel security code reader by OBDII for transponder key programming. In this case you don’t need call dealer for get security code or remove immobilizer to read it manually. For key programming use any key learning tool – TECH 2, AD100 OP-COM or any other;

Use it for used motor ECU repair, reset Engine Control Module and programming. ECU security code is necessary to set back the Engine Control Module to its factory default state. Prior to replace, you have to reset it back to its factory default state. In this way, you can install it into another car. With TECH2 or other equipment you can do this work, but always you need used motor ECU security code (you can read it with CarProg) and car immobilizer security code (remove immobiliser and use TMS370 programmer to read it). Each factory default state Engine ECU has some limited running time, without immobiliser (max 10 attempts);

Carprog Related Contents:

Carprog Software Free Download

Carprog Software Installation Guide

Carprog Supported cars:

Bosch ME 1.5.5 Agila 1.0, 1.2 2000-2005

Astra 1.2, 1.6,2.0 1998-2001

Corsa 1.0, 1.2,1.4 1997-2000

Corsa 1.0, 1.2 2000-2005

Tigra 1.4, 1.6 1997-2000

Zafira 2.0 2002-2003