This instruction show you guide on how to solve Bobcat engine DCU P1A32 Self-Diagnostis in NOx sensor 2 downstream.
Related Contents:
Bobcat Engine Analyzer ECU DCU 2023
2023 Bobcat Service Analyzer 91.15 91.05 Diagnostic Free Download
Overview:
U005713-02
1Electric problem (NOx sensor connector, Wiring harness NOx sensor controller to sensing part, NOx sensor)
2 Electric problem (CAN wiring harness insulation, Resistance)
Component Location:
3) Condition for Running Diagnostic
Non-continuous diagnosis in post-drive
4) Condition for Setting the Fault Code
The average of relative sensor NOx curve slope read from the sensor is outside the tolerance band and
the debouncing has expired the limits (Between 50% and 150%)
5) Condition for Clearing the Fault Code
The average of relative sensor NOx curve slopes read from the sensor is inside the tolerance band and
the debouncing has expired the limits (Between 50% and 150%)
6) Check List
Step 1:
P1A32 is occurred on diagnostic tool?
Yes,go to step 2
Step 2:
After let the machine be in safety area and turn
off the key switch
Yes,go to step 3
Step 3:
Check DCU connection connection problem?
Yes,no necessary repair
No,go to step 4
Step 4:
Check sensor connection Connection problem?
Yes,No necessary repair
No,go to step5
Step 5:
Check Network (CAN line, resistance of H/L) Network problem?
Yes,no necessary
No,go to step 6
Step 6:
Check continuity and electrical insulation Electrical problem?
Yes,fix harness
No,change sensor.
2023 Bobcat Engine Analyzer ECU DCU Diagnostic Software