How to Adjust Neutral for Kubota L3901 Tractor Transmission

This instruction show you guide on how to adjust neutral Kubota L3901 tractor transmission.

 

 

Related Contents:

2022 Kubota Takeuchi Diagmaster v22.08.01 v4.1.2 Software Free Download

Kubota EPC Spare Parts Catalogue 2021.06 Download

Kubota DST-I Diagnostic Tool

 

 

How to Adjust Neutral for Kubota L3901 Tractor Transmission

Adjusting Neutral
1 Disengage the front wheel drive lever. (Drive only rear wheels.)
2 Set the cruise control to “OFF” position. (HST pedal is neutral position.)
3 Check to see that the length (A) of HST neutral rod (5) is specified length.
If not, adjust as follows Length (A): 73.0 to 74.0 mm (2.88 to 2.91 in.).
4 Lift the rear of the tractor so that the rear wheels are off the ground and operate the engine at maximum speed and drive only rear wheels.
5 Slightly loosen the plate mounting screws (4).
6 Press the neutral holder arm (3) to the HST trunnion plate (1).
7 Then rotate the neutral holder (2) clockwise or counter clockwise until wheels stop completely.
8 Hold the neutral holder (2) and tighten the plate mounting screws (4).

NOTE
• Be sure to tighten the plate mounting screw with specified torque.

How to Adjust Neutral for Kubota L3901 Tractor Transmission (1)

How to Adjust Neutral for Kubota L3901 Tractor Transmission (2)

How to Adjust Neutral for Kubota L3901 Tractor Transmission (3)

 

More repair case for Kubota,please refer to:Kubota Trouble Repair

Visited 1 times, 1 visit(s) today