Categories: Auto Coding

Active/Disable BMW X5 Lock/Unlock Beep Sound Confirmation

Here I share the guide on How to Active/Disable BMW X5 Confirmation Beep Sound when you locking/unlock door.

 

Tools you need:

1.BMW ENET(a coding device for BMW F series)

2.A laptop installed BMW E-sys coding software.(BMW E-sys Software Free Download)

BMW Coding/Flashing/Progrmming PDF+Video Guide

 

How to active BMW X5 Lock/Unlock Beep Sound?

Step 1:Connect BMW ENET to BMW X5 and laptop,then open BMW E-sys coding software on your laptop.And select “connect icon” on the upper left corner

Step 2:Here we select option according to vehicle model.

1 series and 3 series select F020

5 series and 6 series select F010

5 series GT and 7 series  select F001

Here we take BMW F15 X5 as example,we select F025.

Then click “connect”

Step 3:Select “Expert Mode ”—>”Coding”.Then click “Read” in the “Vehicle Order” area.It will popup FA file.Here you can make a backup just in case.

Step 4:Move you mouse on the FA,and right click to active.

Click “Read SVT”,then the modules list will show in the left area.

If you get below error window,just ignore it and close it.

Select HUB_NBT module in the module list,then find green color “CAFD” file.And right click to select “Read Coding Data.Then close the popup window after reading.

Step 5:Now,you will see a yellow file under CAFD file.Right click to select “Edit FDL”. Then input PIN code in the pupup window.(Different version E-sys have different PIN code,usually you can find it in the E-sys installation file)

Step 6:You will enter the module submenu.And enter “ACUSTICAL_LOCK_CONFIRM” in search box to find the file.Then open drop-down list of the “ACUSTICAL_LOCK_CONFIRM” file to find “nicht_aktiv” file

Step 7:Select “nicht_aktiv” and right click to select “Edit”.Select “aktive” option in the drop-down list.Then you will find it has been modified.

Finally,Click “Save icon” at the top of toolbar.Then click green arrow to back previous menu,then click “Code FDL” to write code into module.

Processing

After completing process select “close”—>”close”.

Then,you need to restart the NBT.And you will find the beep confirmation has been actived!

You can find the option of  beep confirmation on the menu,just check the option.

Done!

auto

Recent Posts

Jungheinrich Junior AME13 Spring-Loaded Brake Electrical Connection Removal Guide

It is necessary step to remove electrical connection cable before you do disassemble or some…

2 days ago

How to Use Nexiq eTechnician Function Test?

Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic…

4 days ago

JCB JS140 Excavator P0523-68 Engine Oil Pressure Low Solution

Here car-auto-repair.com show you guide on how to repair JCB JS140 excavator P0523-68 trouble code…

5 days ago

Volvo Version 3 and 4 Truck Oil Pressure Test by Volvo Techtool

Here is the instruction show you guide on how to use Volvo TECHTOOL and VOCOM adapter to…

6 days ago

How to Solve Allison 3000 & 4000 Gen5 P071A Neutral at Stop Input Failed ON

This instruction show you guide on how to solve Allison 3000 & 4000 Gen5 transmission…

1 week ago

Mack and Volvo EPA13 GHG17 Engine NOx Conversion Monitor Test

This instruction show you guide on how to use JPRO TO perform Mack and Volvo…

2 weeks ago