Categories: Auto Key Program

All Key Lost Programming by Using Lonsdor K518 on Mazda CX-5 2019

This instruction will show you how to program all key lost for Mazda CS-5 2019 via Lonsdor K518.

More cases about key programming, please refer to All keys lost programming.

Same topic about Mazda key programming for further reference:

How to Program 8C Key for Mazda 323 Manually

All Keys Lost Programming by Using MZ001 and AVDI for Mazda CX30 2020

 

 

Procedures:

Connect Lonsdor with vehicle, running it

Select “Immobilization”

Select “MAZDA”–”CX-5”–”2018-”

Click “Smart key”

Need power ignition

Click “OK”

Follow the on-screen information:

Press and hold the start button for 10sec, and start button light will turn from green to yellow

Release and click the start button ,the dashboard will be lit up.

After do that, click “OK”

Select “All smart key lost”

Note: all smart keys will be deleted, at least 2 keys are required to complete programming.

Click “OK”

Check what ignition ON, if yes, click “OK”

Wait car horn

It’s very important need two keys.

Switch ignition OFF

Follow the on-screen information:

Turn ignition ON

Click OK, Within 10s put the smart key’s logo side close to car start button

When first key programming finished,

Program the next key as same procedure

Slam brake

Remove key after green light off

Time to cheek remote works or not.

 

More cases about Mazda key programming, please refer to MAZDA KEY PROGRAMMING.

 

 

Kevin

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago