Categories: Uncategorized

Autel MaxiIM608 Change Speed Limit for Mercedes Benz Sprinter

This instruction show you guide on how to use Autel MaxiIM608 to change speed limit for Mercedes Benz Sprinter 2013.

 

Procedures:

Build connection between Autel MaxiIM608 and Benz Sprinter 2013.

Then auto scan the vehicle to identify,and enter diagnostic function menu,to select “Control unit adaptations”

Select “Maximum vehicle speed limit”

Now you can see your vehicle speed limit,current value is 92km/h,click “Yes to cotinue

Important note:

EU Directives 2004/11/EC and 92/24/EEC require that all motor vehicles belonging to classes N2 and M2/M3 be equipped with a speed limiter.

The maximum speed can only be changes by specially authrized individuals.

After a change to the maximum speed,a sticker with words to that effect (such as vSet=90 km/h(62 mph) must be placed in the vehicle;this applies to vehicles belonging to the classes named above.

The laws of the respective EU member states must be observed!

LEGEND:

M2:Passenger transport vehicles with more than 8 seats in addition to the driver seat and a permitted gross weight of up to 5 t.

Select “Rescue vehicles,police or government vehicles”,and click “Selection” then press “OK”

Now you will get

Now you can read information again,and the current speed limit have change to:161 km/h

Done!

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago