In this instruction,car-auto-repair.com will show you guide on how to use Autel MK808 to do all keys lost programming for Honda Acura TL2004=2014. Before you program new keys, it’s better to deleting all keys from cars system. If you want to know more information of all key lost, please refer to AUTO ALL KEY LOST.
Procedures:
Connecting the OBD cable to the car. Running Autel MK808 and click “Service”
Click “Immo keys”
Select “Acura”
Switching IGN on with the blank key to give the car power
Flashing green key light means car won’t start
Click “System Selection”
Select “USA”
Select “Hot Function”
Click “OK”
Click “OK”
Click “Special functions”
Select “Add and delete keys”
General description: This function does the necessary registration for registering new keys or deleting registered keys. Click “OK”
Select “All keys lost”
Imput the number of keys you want to register, then click “OK”
Follow the on screen to turn the ignition switch off within few seconds
Then turn the ignition switch on
Check the green blinking key light on or off, it it’s off, click “Yes”
Turn the ignition off and on follow on screen. The registration of keys has been completed, Turn the ignition switch off.
Now you can check key remotes to ensure it will start the engine.
Function is ready.
For more cases about Honda Acura, please visit to HONDA ACURA REPAIR.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…