This instruction show you guide on how to use JPRO Diagnostic software to do braking system switch test for Bendix EC-60 and EC-80.This test provides the ability to troubleshoot multiple switches that are part of the ABS system by toggling the selected switch and observing the effect on the vehicle.
Related Contents:
2024 JPRO Noregon Commercial Fleet Diagnostics Free Download
1 Select the Braking System Switches Test and press Enter or the Start button.
2 The test dialog will be displayed.
NOTE: The specific switches available for selection is dependent on the configuration of the ABS ECU.JPRO DLA+ 2.0
3 Select a switch to test from the available options. Specific Test Description information will be displayed for the selected option. Click the Next button to begin the selected switch test.
4 Follow the test instructions and observe the data values as actions are performed on the vehicle. Click the Graph tab at any time to view a graph of the monitored data values.
5 Select the Back button to return to the switches test selection.
6 When done, press the Exit button to return to the test selection dialog.
More topics about JPRO Diagnostic,please refer to:JPRO Diagnostics Guide
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…