Categories: Auto Key Program

Benz GLK 2008-2014 All Key Lost Programming by Autel IM508S

This instruction show you guide on how to use Autel IM508 and G-BOX3 to do all keys lost programming for Benz GLK 2008-2014.

 

Preparations:

Autel IM508S Programmer (Amazon)

Autel G-BOX3

 

Procedures:

Connect Autel IM508S tablet to XP400 Pro by USB cable

Then use OBD cable to connect the tablet and G-Box3

Connect the jumper to the side of G-BOX3

Access Autel IM508S menu to check the diagram

Manual select car model and year E series,GLK 2008-2014

Control unitàAll key lost fastàOn bench (G-Box fast)

 

Follow the diagram to connect the wires

Then power on the G-BOX3

Now here connect “OK” to enter next step

After data reading follow the prompt message to insert the blank key into the IR keyhole on the programmer

 

Press “OK” to process next step

Here enter 16 digits key password

Please insert the blank key into the IR keyhole on the programmer,and press “OK”

Insert the new key into the EIS.If the red indicator lamp on the key lights up and goes off,the key learning is successful.

If the red indicator lamp stays lit,try inserting and removing the key for several times.If still not working,the key addition failed.

Turn ignition on and check if the vehicle can be started normally.If the vehicle not started normally,the key addition failed

Check if remote lock and unlock functions can work normally.If not,please check if the key battery can not work normally.

If the key battery works normally and the remote function is still invalid,the key addition failed.

The key is generated successfully

For more Autel customers feedback,please check it here:Autel device feedback

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

24 hours ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

4 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago