In this instruction,car-auto-reapir.com show you one Benz key programming case of Mercedes Benz W211 all key lost programming by AVDI programmer.For move AVDI case,please check:AVDI Key Programming Cases.
Procedures:
Start with connecting to the PT CAN-CH and CLin passenger footwell
CH is green/white,CL is solid green,using the needle connectors to connect
Connect CH and CL to 3-11 on the ZN051 DS-Box
Start with opening the DAS Manager,and read EZS data
Click “Get EZS Pass” button to start the password reading procedure using the IR-Adapter
The IR-adapter is being inserted into the EZS
Please disconnect ISM/DSM from the car
It is easier to remove its fuse located near the passenger door.
This is the fuse that is to be removed
Proceeding with PW reading after the ISM fuse has been disconnected.
Active AMS and internet connection are needed for the procedure
Here the password popped up at 300 counts
Now back to click “Prog/Emulate Key” and click “Program”
Then please check the “Automatic Key Activation” option
Select the desired position,and click “OK” to continue
Insert key in your ProgTag programer
Wait key programming,it will show you massage “Key programmed”
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…