Categories: Auto Coding

Benz W222 HU5 Video In Motion Coding by Vediamo

Here I want to show the procedures on how to use Vediamo perform Video In Motion coding for Benz W222.In this article I take a Mercedes Benz W222 from 10-2016 as example.

 

Comand head unit installed:

 

What You Need:

For the coding I used Vediamo software

CBF file HU5.CBF

 

 

Procedures:

For video in motion above 5 kph by default there is no selection possible to select “Enable” as with all the other settings so you have to do some manual coding on the second Byte.

First select “VCD_Driver_Distraction_ECE_USA_CHN”.

Enter decimal value 068 on the second (byte) position and click on the button “ECU-Coding”

Video in motion is now Enabled without making use of a can bus filter.

If you use DTS Monaco (I think) you have to enter a HEX value so that must be 44.

 

Comand start-up screen

For another Comand start-up screen you change “VCD_Several_Applications” the setting “Cl Screen”;

Type 1: “Mercedes”

Type 2: “AMG”

Type 3: “MAYBACH”

Type 4: “AMG”

Example (Type 3);

auto

Recent Posts

Caterpillar C9 Engine Injection Actuation Pressure Output Fault Solution

This instruction show you guide on how to solve Caterpillar C9 engine injection actuation pressure…

2 days ago

How to Remove HV Battery Cooling FAN for HINO Truck with J05E Engine

Here is the instruction show you guide on how to remove HV battery cooling fan…

5 days ago

Scania Truck ALarm System APS 00001C Control Unit Error

Here is the instruction show you guide on how to solve Scania truck alarm system…

1 week ago

Doosan Stage V Engine U02A2 Timeout Error of CAN-Receive-Frame A1DEFI Solution

This instruction show you guide on how to repair Doosan stage V engine U02A2 timeout…

2 weeks ago

How to Solve Doosan Stage V Engine P011E Coolant Temperature Plausibility Fault

Here is the instruction show you guide on how to repair Doosan stage v egnine…

2 weeks ago

How to Use JPRO Diagnostics Performance Check Low Temp ATD Detroit Engine

This instruction show you guide on how to use JPRO Diagnostic software to performance check…

2 weeks ago