Categories: Auto Repair

BMW 530e G30 ZBE/CON Controller Coding by Launch X431 PAD VII

After replace the screen,if you find there is no functions,you need to do EDC damper statellite coding.This instruction show you guide on how to use Launch X431 PAD VII to perform ZBE/CON controller EDC damper satellite coding for for BMW 530e G30.For more repair case of BMW,please check BMW Trouble Repair.

 

Tool You Need:

Launch X431 PAD VII

 

Procedures:

Connect Launch X431 PAD VII to BMW 530e

Then power on Launch X431 PAD and automatically search vehicle identification

After scanning,go to “Coding/Program” option

Select “Coding”

It show the vehicle information,press “Next”

Scroll down to select “ZBE/CON(Controller)”

Select “S15A-18-07-546”,then wait coding processing

 

Recoding has been completed

Now go to system list to check the DTC in ZBE/CON controller,you will find there is no DTC.

More test report about Launch X431 please check:Launch X431 Test Report

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

23 hours ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

4 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

7 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago