BMW F10 New Code-Seat Heating/Cooling Adjustment Guide

BMW F10s come with a wide arrangement of seats. They can be either Comfort or Standard, Front Heated seats, Rear Heated seats, and Ventilated seats. The codes below apply directly to those with Comfort / heated and ventilated front seats and with heated rear seats. I suspect they also apply to other configurations.

As far as I am concerned, the seat heating in my car works quite well and it is fast. On the other hand, the ventilation (cooling) leaves a lot to be desired, especially if you live in a hot climate. Both the heating and ventilation of the seats can be adjusted to your specifications by changing the codes below.

Note:For more BMW repair,please check here:BMW Trouble Repair

 

Front seat heating

To switching on seat heating you press the button shown below once for each temperature level.

The maximum temperature is reached when three LEDs are lit.

 

The default temperatures are:

Seat Heater position 1 cushion Werte=20 (32° C)

Seat Heater position 2 cushion Werte=24 (36° C)

Seat Heater position 3 cushion Werte=2D (45° C)

Seat Heater position 1 back seat Werte=1D (29° C)

Seat Heater position 2 back seat Werte=21 (33° C)

Seat Heater position 3 back seat Werte=2B (43° C)

 

The settings can be adjusted by changing the werte values in the following codes. Remember the werte values are in hexadecimal.

 

Front driver seat cushions:

SM [6d]-­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST1_KI

SM [6d]-­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST2_KI

SM [6d]-­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST3_KI

 

Front driver seat back:

SM [6d] -­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST1_LE

SM [6d]-­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST2_LE

SM [6d]-­>3007 SITZHEIZUNG, 1C-­>SHZ_TEMP_SOLL_ST3_LE

Corresponding values can be found for the front passenger seat in the SM [6e] ECU

 

Front active seat ventilation

The seat cushion and backrest surfaces are cooled by means of integrated fans.

To switching on press the button shown below once for each ventilation level. The highest level (coolest) is active when three LEDs are lit.

 

The default temperatures are:

Seat cooler position 1 cushion Werte=23 (35° C)

Seat cooler position 2 cushion Werte=21 (33° C)

Seat cooler position 3 cushion Werte=1E (30° C)

Seat cooler position 1 back Werte=23 (35° C)

Seat cooler position 2 back Werte=21 (33° C)

Seat cooler position 3 back Werte=1E (30° C)

 

The settings can be adjusted by changing the werte values in the following codes. Remember the werte values are in hexadecimal.

 

Front driver seat cushions:

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST1_KI

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST2_KI

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST3_KI

 

Front driver seat back:

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST1_LE

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST2_LE

SM [6d]-­>3008 SITZKLIMA, 13-­>SKL_TEMP_SOLL_ST3_LE

Corresponding values can be found for the front passenger seat in theSM [6e] ECU

I selected 25° C (werte=19) for my position 3 ventilation setting and it works great.

The rear seat adjustment are a bit less flexible. The settings correspond to both seats in the back.

 

The defaults there are as follows:

Seat Heater position 1 seat back 32° C

Seat Heater position 2 seat back 36° C

Seat Heater position 3 seat back 45° C

Seat Heater position 1 cushion 32° C

Seat Heater position 2 cushion 36° C

Seat Heater position 3 cushion 45° C

The settings can be changed by changing the values (just a few choices with those) in the following codes:

 

Rear seat back:

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­>TEMP_LEHNE_STUFE_1_FOND

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­>TEMP_LEHNE_STUFE_2_FOND

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­>TEMP_LEHNE_STUFE_3_FOND

 

Rear seat cushions:

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C -­>TEMP_SITZ_STUFE_1_FOND

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C -­>TEMP_SITZ_STUFE_2_FOND

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C -­>TEMP_SITZ_STUFE_3_FOND

 

Note:

For some of you, the heating of your seats may not be controlled by the settings in the SM ECU or

your car may not have the SM [6d] and SM [6e] ECUs. I would suggest you look the codes below to adjust the heating of your front seats.

 

Front seat back:

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­> TEMP_LEHNE_STUFE_1_FRONT

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­> TEMP_LEHNE_STUFE_2_FRONT

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C-­> TEMP_LEHNE_STUFE_3_FRONT

 

Front seat cushions:

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C -­> TEMP_SITZ_STUFE_1_FRONT

JBBFE-­>3050 SeatHeating_AdditionalSeatFunctions, 1C -­> TEMP_SITZ_STUFE_2_FRONT

JBBFE-­>3050SeatHeating_AdditionalSeatFunctions, 1C -­> TEMP_SITZ_STUFE_3_FRONT