Categories: Auto Key Program

BMW R650 2014 Motorcycle All Key Lost Programming

This article show you how to do BMW R650 2014 motorcycle all key lost programming by Tango key programmer.And for more motorcycle key projects,check here:Motorcycle key programming

For BMW immobilizer system,there are 3 types:

ECU immobilizer type

Immobilizer box type

Instrument cluster type

Note:I have write many key program cases here:Auto key programming.

Remove the instrument cluster and i found the chip:25LC160,so it is belong to instrument cluster immobilizer type.

Use Programmer to read out the immobilizer data file from 25LC160,then use key programmer to program chips.

 

Here i have try other key programmer to do this BMW R650 key programming,VVDI2 and TM100 both can not support the 25LC650 chip.

 

So i try to use Tango key programmer to do it.

Please note it,you need pay for authorized by BMW key programming

Load the data file read out before from 25LC160,it show that there are two keys exit on key1 and key2.

Here i program two new chips on position key 5 and key 6

And write this new data file back to 25LC160 chip,and solder the chip back on instrument cluster and install back.

After then,use key cutting machine or make mechanical key manually.

 

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago