This article show a guide on how to use Launch X431 to perform steering angle learning for BMW X3 E83.
Procedures:
Built connection between your BMW X3 and Launch X431.
Enter the menu to select “BMW”
The software instruction as “The software can diagnose the elec.control sys. Of BMW,include Engine/Chassis/Body and other parts.The operation is the same as the original scan tool”
Processing,please wait…
Select “Manually Select”
Select “X Series”
Select “x3-E83”
Choose “Chassis”
Select “ABS (Anti-lock Brake System-DSC)”
The Launch X431 prompt you to check the ECU identify
Select “Special Function”
Select “Steering Angle Learning”
The steering angle must be calibrate after following jobs:
-Replacement of steering angle sensor
-Replacement of DSC control unit
-Adjustment work on steering geometry
-Working on steering and/or front axle
The run flat indicator must be additionally initialized after adjusting the steering angle sensor on completion of the following work:
-Replacement of DSC control unit
It prompt you “Do you want to carry out steering angle sensor matching?”
Click “Yes” to continue
Steering angle sensor matching
Exactly set front wheels to straight-ahead position (Approximate setting sufficient)
The adjustment procedure is started in the next test step
After successful calibration,it prompt above information
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…