One BMW X5 3.0Si SUV with 160 kilometers,the owner described that self-adaptive headllights work incorrectly and troulbe lamp light on when after repalcing headlights .
It importance that we need to coding for self-adaptive headlights controller after you replacing headlight.And it will remind you that “self-adaptive headlights unstuck”,it need to code.
Step 1:Connect X431 Pro to vehicle and read the trouble code”9CC1”.Then check control information,X431 pro display “self-adaptive headlights unstuck” shows below:
Step 2:Back to menu,select coding “recode”
Step 3:Select “data stream” and then selected the first option “bmw comfort access(cas) and frm module unreplacement
Step 4:It will show the vehicle information about ”VIN,Factory data status,current data status..and so on.Select next step.
Step 5:Select “coding system list”
Step 6:Select “LSMC”(left stepper motor control)
Step 7:Screen will show LSMC vehicle order,after selecting “Yes” it will show as below:
After coding it will remind you “recoding complete”,click “comfirm” to finish.
Go back to FRM system to clear the trouble code,and the “self-headlights unstuck” warning will disappear.
Self-adaptive headlights system a new technology which equiped to top grade cars.You need to master function principles, learn procedure of repairing and know the new features of repair device.All of them help you to solve problems easily and quickly.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…