This is a mini guide on how to use carprog to programming keys for Daihatsu immobilizer system.
Carprog Related Contents:
Carprog Software Free Download
Carprog Software Installation Guide
Daihatsu Immobilizer Key Transponder Type:
Model Transponder type
CHARADE TEX
COPEN TEX
CUORE TEX
FEROZA TEX
MOVE TEX
SIRION TEX
TERIOS TEX
YRV TEX
Daihatsu immobiliser system with separated immo box and Texas transponder (4C by Silca). Immobiliser box are located near to ignition key. Usually this is black or brown box marked “immobilizer” or “134.2 kHz”.
Remove immobiliser ECU from the car and open it. Find 93C66 EEPROM in DIP package. Use A5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…