Categories: Auto Key Program

Carprog Mercedes Benz Key Programming Guide

CarProg based Mercedes Benz Transponder key immobiliser system used on Mercedes Benz cars 1997-2001 immobilizers programming and transponder key generating and programming software.

 

Carprog Software & Hardware Recommend:

Latest Carprog Crack v10.93 Free Download

How to Install Original & Crack Carpog Full V10.93 Software

Carprog Clone

 

Works on: MB A-class 1997-2001, C-class 1996-1999, E-class 1997-1999, CLK 1998-2001, Sclass 1997-1998.

You need just connect 5 wires to immobiliser connection points as on picture and program transponder key.

Type 1: Immobiliser with Motorola processor HC05X32 mask set 2D59J. Tested also with 5WK4688 (mask set 0D53J). Remove immobiliser from car, connect adapter A10 like in picture:

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

 

Type 2: Immobiliser with Motorola processor HC05X32 mask set 1D69J.

Remove immobiliser from car, connect adapter A10 like in picture:

 

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

8

Type 3: Immobiliser with Motorola processor HC05X32 mask set 0D69J ( 5WK4680 with mask set 0D69J, 5WK4696 with mask set 0D66J). Remove immobiliser from car, connect adapter A10 like in picture:

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

10 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago