ECU Chip Tuning Archives - Page 6 of 9 - Auto Repair Technician Home

December 4, 2018 auto 0

Here is a post show how to use WinOLS to correct checksum for Opel Motronic 1.5.5.For this guide I’ll use the HW 0261206102 file, but […]

December 1, 2018 auto 0

As described at the end of How to Choose Right Driver to Original File for ECU, at the end of the Drivers association procedure ECM […]

November 22, 2018 auto 0

Here is a operation guide on how to use DPF EGR Lambda Remover to remove the DPF and EGR for VW Touran EDC16U31 and EDC16U34. […]

November 13, 2018 auto 0

Before re-flashing a file edited w with ECM Titanium with a Chip-tuning tool, itt is necessary to save a copy of the modified file on […]

November 4, 2018 auto 0

Re-flashing an ECU -what is usually called Chip-Tuning -means to change the values included in the maps of the original file and then flash the […]

November 3, 2018 auto 0

This Tuning Guide is for VAG EDC17. The specific model which are used is Audi A4 2.0 TDI with Common Rail engine. Vehicle Information: […]

October 31, 2018 auto 0

Here we’ll give a brief breakdown on how a Bosch EDC15P+ ecu works. The example below is taken from an early 2004 Skoda Fabia vRS […]

October 30, 2018 auto 0

In this post,I want to show the steps about WinOLS disable EGR for Audi A6 2.0 TDI PD 410HP.And If you want to get more […]

October 29, 2018 auto 0

This article show the how maps of an original file can be displayed if associated to a driver when using ECM Titanium. Preparations: Crack […]

October 23, 2018 auto 0

The EDC15 is a much used ECU in “semi-modern” diesel cars like golf 4 TDI from 2000 on. It is used in much more cars, […]

October 16, 2018 auto 0

Here is a mini guide on how to use WinOLS disable EGR for Opel Astra H1.9 CDTI 16V.And I write another guide on : WinOLS […]