What is Caterpillar ET?
Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.
Related Contents:
CAT Adapter 3 ET4 478-0235 High Quality Diagnostic Adapter
Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download
Caterpillar Factory 18 Digits Password Service
Caterpillar ET Functions List:
1.View active and logged diagnostics.
2.View events where irregularities occurred and were logged by the ECM.
3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
4.Record and log performance data.
5.Graph a group of status parameters.
6.View the current configuration of an ECM.
7.Change ECM configurations.
8.Perform diagnostic tests.
9.Perform calibrations.
10.Print reports and diagnostic results.
11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Caterpillar ET Diagnostic Software Support Interface:
CAT ET4 478-0235 High Quality Diagnostic Adapter
Caterpillar ET Support Languages:
English,Chinese,Danish,French,German,Italian,Portuguese,Spanish
Caterpillar ET Support OS:
Window 7,Window 8,8.1,Window 10 32 bit and 64 bit
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor·
3GB RAM·
3GB of available hard disk drive·
DVD-ROM drive·
15.4 inch XGA Screen (1280×1024 compatible)·
MicrosoftÒWindows™ 7 Professionalor Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorerversion 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater·
1GB RAM·
500MB of available hard disk drive·
CD-ROM drive·
Super VGA monitor or display (1024×768)·
MicrosoftÒWindows™ 7 Professional or Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorer version 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Caterpillar ET Free Download
Caterpillar ET 2018 A
https://mega.nz/#!zIZUDARZ!q8wQWzgM9CeZrxZdp5VhaFCRULvv_b_ENE0e1Oe_UHM
Caterpillar ET 2024A & 2023C & 2019C Download (paid version work 100%)
How to Install & Activate Cat Electronic Technician 2019C & 2018C
This instruction show you guide on how to solve Allison 3000 & 4000 Gen5 engine…
Here is the illustration show you guide on how to solve Fendt MT1149 tractor SCR…
Here is the instruction show you guide on how to set play between timing pinion…
Perkins 1106D Generation Injector Data Incorrect Test Guide Preparations: Perkins EST 2024A & 2023A…
This instruction show you guide on how to solve Deutz EMR3 engine error 16/108/APSCD trouble…
Here show guide on how to check high pressure relief valve pressure for Kubota L4701…