Categories: Auto Repair

Change Signature Light for Nissan Maxima 2017 by Launch X431

In this instruction,i will show you guide on how to use Launch X431 to set signature light for Nissan Maxima 2017.And for more Nissan repair,please check:Nissan Trouble Repair.

 

Procedures:

Build connection between Nissan and Launch X431,then enter menu to select “Nissan”

Select “The Vehicle With 16PIN”

After then select “Automatic Selection (VIN)”

Select “System Selection”

Select “BCM(Body Control Module)”.

Select “Special Function”

Select “Signature Light Setting”,and the press “OK”

Now you can select “On” or “OFF”

Once complete,select “back” button

More Launch X431 Training article,please check here:Launch X431 use guide

 

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

53 mins ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

2 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

5 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago