Categories: Auto Repair

Decel G Sensor Calibration for Nissan Maxima 2017 by Launch X431

In this instruction,i will show you the test on how to use Launch X431 Throttle to perform Decel G Sensor calibration for Nissan Maxima 2017.And for more Nissan repair,please check:Nissan Trouble Repair.

 

Procedures:

Connect Launch X431 Throttle to Nissan Maxima OBD port,then enter menu to select “Nissan”

Then select “The Vehicle With 16PIN”,once the VIN populates select “OK”

Select “Automatic Selection” and then “OK”

Select “System Selection”

Select “ABS(Anti-lock Braking System)”

Select “Special Function”,then select “Decel G Sen Calibration”

Park the vehicle on a level,and touch “Start”.

Then,calibration of the decel G sensor will be activated

To begin the sensor calibration select “Start”

Once completed select “OK”

More Launch X431 Training article,please check here:Launch X431 user guide

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

1 day ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

4 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago