The Diamond Logic® Builder software can be used to update other modules that are detected on the truck data links.So here car-auto-repair.com share the guide on how to use Diamod Logic® Builder to update vehicle modules.
Preparations:
Navistar Diamond Logic Builder (DLB) Free Download
How to Install Navistar Diamond Logic Builder (DLB) Software
Procedures:
1.In the lower section of the Select tab, select the Detected Modules sub-tab.
2.Right click on one of the Detected Modules to see the dropdown menu shown below.
3.Select the desired option. Any module that is not grayed out can be selected.
The Update Module option updates the module’s software to the latest version.
The Program Module option programs any updates made in DLB into the module.
There are also two options in the menu bar that allow users to update module software:
Select Edit > Update Software > Update All Software to update all modules that are capable of being updated.
Select Edit > Update Software > Update Module to update only the module that is shown as selected in the Detected Modules sub-tab.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…