Here is the instruction show you guide on how to solve Doosan engine P0087 SPN 520196 FMI12 rail pressure physical range low.
Related Contents:
Doosan Data Monitoring System DMS-5 DMS-3 Free Download
2023 Doosan Diagnostic Tool DDT & G2 Scan Software Free Download
Code:
P0087 SPN 520196 FMI 1
Reason:
If the rail pressure falls below the limiting value based on the engine speed, this error will be detected.
Effect:
SVS Torque limit 0%
3) Condition for Running Diagnostic
– Engine running
4) Condition for Setting the Fault Code
– If the rail pressure falls below the limiting value based on the engine speed
5) Condition for Clearing the Fault Code
– If the rail pressure does not fall below the limiting value based on the engine speed
6) Check List
Step | Inspection | Standard Value | YES | NO |
1 | P0087 is raised on diagnostic tool? | Step2 | ||
2 | Check the battery voltage Battery voltage is normal? | Step4 | Step3 | |
3 | Change battery & Engine running Problem fixed? | Problem fixed | Step4 | |
4 | Check FIE system related faults or malfunction If any, please refer to related manual & take action Problem fixed? | Problem fixed | Step5 | |
5 | Check if there is any leak in the FIE system If there is any leak, fix or change that part Problem fixed? | Problem fixed | Step6 | |
6 | Change all FIE system (CP-> Rail ->HPC & Injector) For each part change, run engine and then check if the fault disappear or not before next part change Problem fixed? | Problem fixed | Call Hot line |
Here is the instruction show you guide on how to repair JCB backhoe loader 3X/4X/5X…
Here is the instruction show you guide on how to repair Scania truck ALM alarm…
Here is the instruction show you guide on how to solve Perkins 1106D electric power…
This guide from Autel company to help you solve Autel IM608 application disappeared after update.…
Here is the instruction show you guide on how to use Launch X431 PAD5 Link…
The engine ECU (1) controls the amount, timing,mixture and pressure of fuel that is injected.…