Engine Scanning via OPCOM(VauxCom) on Astra J

This instruction show you guide on how to use OPCOM(VauxCom) to scan A17DTR engine on Opel Astra J 2011. More projects about Opel please refer to:Opel trouble repair.

 

Preparations:

Newest OPCOM VAUX-COM V1.95 All Version Free Download

 

Procedures:

Connect your OPCOM interface to Opel Astra-J obd port,then run software.

Enter system selection to select “Diagnostis”

Select “2011(B)

Select “Astra-J”

Select “Engine”

Select “A17DTR”

Click “Fault Codes”

Click “Close”

Click “Programming”

After checking, click “Back”

 

If you want to know more about OPCOM, pls refer to OPCOM VAUX-COM

 

Kevin

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago