This article show a guide on how to use FCOM to coding for Ford Fiesta 2010 from kilometers to miles.
Preparations:
FCOM Ford OBD2 Diagnostic Software Download
How to Install FCOM Diagnostic Software on Window/Linux
Procedures:
Run FCOM software and then click “Select Control Unit”
Select “IPC-Instruments panel cluster”,then click “Go” to continue
Select “Configuration” under Expert functions“
Select “Control unit configuration”
Then scroll down the bar to select “Speedometer unit”,and click “Edit” to continue
You are changing “Speedometer unit” configuration option.
Please choose from available options,change mph
Click “Continue”
Click “Write configuration to ECU”
Click “Yes” to continue
Now your coding successfully
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…