Here I want to share the procedures of how to program smart keys for Ford Explorer 2015 all keys lost via AURO IM600.
What You Need?
Ford Explorer Keyless Smart Key Fob (Amazon $15.95)
IM600 (IM100 Amazon or IM100 UOBD2)
Note:IM100 also can program keys for Ford Explorer,if you have question,ask your auro dealer.
Procedures:
Connect AURO IM600 to Ford Explorer,and select “IMMO”.
Then it will show the disclaimer massage,select “Accept”
Now it will show the vehicle brand option,select “FORD”
Select “Manual Selection”
Select “USA”
Select “Explorer”
Select “2011-2015”
Select “Smart Key”
Keless System(CAN)
All smart keys lost
It prompt you “This function will delete all learned smart keys.Would you like to continue?”
Press “Yes” to continue
Then follow the AURO IM600 to operate
Turn the ignition to ON position with the engine OFF.
It will prompt you “This procedure will take 10 minutes.Would you like to continue?”
Press “Yes” to continue
Configuring the system,please wait about 10 minutes…
During the programming progress,the system will program and erase keys automatically
Then follow the operation to insert the smart key to be learned into the slot.
Learning key,please wait…
Learning successful.Do you want to learn the next key?
Press “Yes” to continue
Remove the smart key from the slot.
Insert the smart key to be learned into the slot.
Learning key,please wait…
Learned Keys:2
Press “OK” to continue
And if you want to learn more keys,press “Yes” to add more.
14
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…