This is a Ford IDS software on VCM Testing for Ford Focus.
Latest Ford IDS v107 v106 Software Free Download
Ford IDS Software Installation Guide (Original & Crack)
Ford IDS Testing on Ford Focus by VCM Video:
Connect your Focus OBD port to laptop USB port by Ford VCM.
Then you can find a local connection has already build here.
Run the Ford IDS software on your desktop
If it is your first time to tested with this device,you have to build the connection between cars and the IDS BCM device.
Here we delayed it.
And If it you first time to use this device,you will see here at the right bottom icon to add coins.It means the engine is start.
Note:Please make sure the engine is on,this is very import!
Select “Start New Session”–>Select “All other”
Choose “yes”
Next it will build connection to PCM
System will prompt “Was the vehicle built before March 2008”
Select “No”(According to your cars)
The software will show the VIN number,if it is correct,please select “Yes”
After system reading odometer info,please select “Yes”
It will show the Vehicle information as below:
Vehicle:Focus
Engine Type:DURATEC-HE/14
Capacity:1.8L
PATS:Equipped
Transmission:Manual
Ignition:Integrated EDIS in PCM
Fuel Type:Gasoline
Emission level:All other
VIN:LVSHCAMEX8F325868
Select upper left corner icon for the further diagnosis:
ElectricalàExterior Lighting
Select “Data Link Monitor”
Select “Yes”,at lower right corner
And you can see the level with your lights operations
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…