Categories: Auto Repair

G-Scan 2 Perform Actuation Test on Mitsubishi Fuso Commercial Truck

This instruction show you the guide on how to use G-scan 2 diagnostic tool to perform actuation test for Mitsubishi Fuso Super Great Truck.And if you want to know more G-scan 2 test report,check here:G-scan2 test projects.

Depending on engine types,number of supported actuation tests is different.Check if it’s supported and you can try to test the defective parts for its operation.G-scan diagnostic tool will command ECU to actuate selected parts.During the test,you can actually hear the sound or visually check the movement of parts.

 

Procedures:

After vehicle identification,select [System Search]

Select [Engine],then press [Start] button to enter the function optional.

Then select [Actuation Test]

In this actuation test,it’s got 60 different actuation tests

EGR openings,intake metering valve and you can also test VGT which stands for variable geometric turbo.

You can test brake,exhaust brake,air heater relay,EDU relay.Air conditioning,fuel leak check,and injectors.

Here take injector test as example,test number 1 cylinder injector.Select [Injector Test 1]–>[Select]–>[Start]

Then it will show you the data analysis as below,check the item value

Select [Stop] button on G-scan 2 screen to end

And you can press [Cancel] button to select other item to perform actuation test.

Just like this,you can test other systems,EGR and so on.

 

By using actuation test function,you do not have to remove the parts or manually test the defective parts to check its operation.Now,when you are done with preliminary checks and still the problem exists,you might do some extra visual inspection.After all checks and defective part is confirmed,you would make a decision,replacing or fixing.

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago