Topic:How to use Caprog to reset airbag made by Delco for GM from 1999-2005.
Description:
Works with GM group from year 1999 to 2005 (GMC-Chevrolet-Chevy-Saturn-Cadilac-Pontiac)
airbag sensors made by Delco (these airbag modules have brown botom side):
Support airbag (SRS) sensor internal memory (EEPROM) read/write by OBDII connector,
error and crash data erase by diagnostic, error reading and testing by OBDII.
Carprog Tool Related Contents You Need for This Project:
Latest Carprog Crack v10.93 Free Download
How to Install Original & Crack Carpog Full V10.93 Software
How to use
Just plug CarProg GM OBDII adapter (not use standart OBDII CarProg adapter) to the car
OBDII connector, connect CarProg to PC USB connector and start CarProg GM Airbag
program. Now you can read faults and clear fault memory:
Also you can read and write all internal EEPROM memory. We recommend to do it every time before “crash data” erasing. We don’t have all GM models data and you can destroy airbag module.
Read and save EEPROM before “crash data” erasing !!!
!!! This is experimental product and you can damage your car. We are not
responsible for any car damages relating this product !!!
by pushing “Clear crash data” you can erase car crash even and airbag module will stay ready to use again.
Crash erasing without car:
You must build simple wiring on the table. Now you can connect CarProg GM Airbag like in car.
Airbag type 1 (GM cars year 1999-2002):
Airbag type 2 (GM cars year 2002-2004):
Airbag type 3 (GM cars year 2005-2006):
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…