Heavy Equipment Repair

HINO J05E Engine 2018 P0016 Crankshaft Position Sensor Solution

Here is the instruction show you guide on how to solve HINO J05E Engine 2018 P0016 crankshaft position sensor and camshaft position sensor rationality.

 

Related Contents:

Nexiq USB2 Diagnostic Adapter

2024.01 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download

HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download

 

 

Technical Description:

1) A phase difference (deviation) between the engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) pulse is diagnosed.

 

Description of Malfunction:

1) Detect the phase difference between engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) pulse.

 

DTC Set Condition: .

1) DTC Detection Condition: :

  1. a) Battery voltage is in the range of 10 to 16 V.
  2. b) Engine speed is in the range from 700 to 1,000 r/min.
  3. c) Engine coolant temperature is 60 °C {140°F} or higher.
  4. d) A difference between an actual engine speed and a target engine speed is 20 r/min or less.

 

Judgement Criteria:

1) A phase difference between the engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) is 7° or more for 1 second or more continuously.

 

Reset Condition:

1) After restoration to normal condition.

Indication, Warning or System Control Regulation When The DTC Is Set:

1) MIL: ON .

2) SVS light: OFF

 

Symptoms On The Vehicle The DTC Is Set:

1) Symptoms On The Vehicle Due To Backup Control (Fai Safe Function):

  1. a) None

2) Symptoms On The Vehicle Due To Malfunction:

  1. a) None

 

Pre-Inspection Work:

1) Check that the battery voltage is in the normal range.

After-Inspection Work:

1) Clear all past DTCs.

2) Check that no DTC is detected after test drive.

 

Possible Causes:

1) Camshaft gear: Check assembly.

2) Flywheel: Check for miss assembly.

3) Engine speed main sensor (crankshaft position sensor):

4) Check the installation position.

5) Engine speed sub sensor (camshaft position sensor): Check the installation position.

 

More case for HINO please refer to:HINO Trouble Repair

auto

Recent Posts

QSK60 CM2358 Engine Camshaft Speed/Position Sensor Data Erratic Incorrect

This illustration show you guide on how to repair Cummings QSK60 CM2358 engine camshaft speed/position…

4 days ago

Fendt MT800E Tractor DEF Tank Temperature Does Not Change Solution

Here is the instruction show yo guide on how to solve Fendt MT800E tractor DEF…

6 days ago

HITACHI Construction 4JJ1 P0092 Fuel Pressure Regulator Control Circuit High

Here car-auto-repair.com show you guide on how to solve ISUZU construction 4JJ1 engine P0092 fuel…

1 week ago

How to Solve Perkins 1106D EPG Engine E398 Low Fuel Rail Pressure Error

Here is the illustration show you guide on how to solve Perkins 1106D electric power…

1 week ago

Deutz EMR3 Aassembly Inspection and Initialisation Test Guide

Here comes the instruction on how to use SerDia2010 to perform assembly inspection and initialization…

1 week ago

HITACHI ZX-5 Excavator No Load Max Differential Pressure Measurement Guide

This instruction show you guide on how to perform No load max differential pressure measurement…

1 week ago