Heavy Equipment Repair

Hitachi ZX-5B Excavator Injector Operation Checkup by Hitachi MPDr

This instruction show you guide on how to use Hitachi MPDr diagnostic software to do injector operation checkup for HITACHI ZX-5B excavator.

 

What You Need?

Hitachi Dr.ZX diagnostic Tool

Hitachi AllinOne MPDr v3.32 v2.25 2021 Diagnostic Software Free Download

 

Procedures:

Connect HITACHI Dr.ZX diagnostic tool Hitachi ZX-5B excavator,then run HITACHI ALLINONE MPDr

Click “Function”à”Engine/MF”à

Engine related operation check such as forced operation of valves and forced termination of the injector can be done.Items to be used vary depending on the machine model.

 

Item can be selected from related failure symptom or items list.
Click the [[A] Engine Operation Checkup] button.

Select “Item Selection”

Now select “Injector Operation Checkup (with engine running)

By following the procedure displayed on the monitor screen, click [Stop] button to stop cylinders.
Follow the procedure displayed on the monitor screen to operate other functions.”

Take action shown below after setting actual engine speed in the range of 800 to 1400 min-1.

[Procedures]

1) Depress transmit key to decrease idling speed to 250 min-1.

2) Select cyfinder to be stopped. Depress stop key.

*Depress stop key within 10 seconds after depressing transmit key.

*Unless actual engine speed is slower than 1400 min-1, stop key can not be depressed.

[Check Points]

1) Check change in engine sound and vibration.

2) Connect current probe to injector harness.Check for current off.

*Conduct checking within 10 seconds after depressing stop key.

 

More repair case for Hitachi,please refer to Hitachi excavator trouble repair

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago