Here is the instruction show you guide on how to perform revering valve operation for HITACHI ZX-6 excavator.
What You Need?
Hitachi AllinOne MPDr v3.32 v2.25 2021 Diagnostic Software Free Download
Connect Hitachi Dr.ZX cable to HITACHI ZX-6 excavator diagnostic port
Then Run HITACHI AllinOne software on desktop
Select “Functions”à”Engine”à”Active Test”
Then select “Operation Check of Revering Valve”
Please carry out only in the state of key switch ON
Revering Valve checking of operations cannot be carried out during engine operation
It cannot carry out,when DEF/AdBlue tank temperature or DEF/AdBlue supply module temperature is less than-5 deg C.
Please carry out after carring out warmth of the body and carring out DEF/AdBlue tank temperature and DEF/AdBlue supply module temperature more than -5 degC.
Procedures:
1 Please change into a key switch ON state (Engine Stopped)
2 Depress start button
One time 60 seconds turns on a valve (Opened),it turn off automatically in 60 seconds (Closed)
3 Please check whether the operation sound of Reverting Valve in a DEF/AdBlue supply module can be heard
4 After work,turn key OFF
Click [Start].
The forced operation is continued while “Executing” is displayed.
Click [Stop] if you want to stop the forced operation.
Turn the key switch OFF.
More repair case for Hitachi,please refer to Hitachi excavator trouble repair
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…