When the aftertreatment device has been replaced,it is required to rewrite the serial No. of aftertreatment device and upload the data to e-Service.So here car-auto-repair.com show you guide on how to rewrite aftertreatment device serial No. FOR Hitachi ZX890-7 hydraulic excavator.
Preparations:
Hitachi MPDr v2.56 v2.25 Diagnostic Software Free Download
2016 HITACHI Parts Manager Pro 6.5.5 Free Download
2019 Hitachi Workshop Service Manual PDF Download
Procedure
1.Connect MPDr..
2.Set the key switch to the ON position.
3.Select Functions-Engine-Aftertreatment Device No. with MPDr..
4.Input the serial No. after the replacement to the following items of Oxidation Catalyst (DOC), Filter (CSF) and SCR Catalyst.
5.After inputting, select [[F5] Set].
6.Upload the input data to e-Service.
NOTE:When the input data is uploaded to e-Service, the M-Find product specifications and history will be updated.
More repair cases for Hitachi excavator,please refer to:Hitachi Excavator Trouble Repair.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…