This instruction show you guide on how to use Launch X431 device to program electronic throttle valve idling for Honda Odyssey 2011.For more Honda projects,please check Honda Trouble Repair.
What You Need?
Procedures:
1.Select the Honda software V 45.30 above;
2.Select 16Pin
3.Select system
4.Seclect engine system
5.Select the special function
6.Select the throttle valve;
7.Click the “throttle valve position”
8.Prompt again :”Do you want to reset the learning value of the throttle valve position?
9.Prompt :setting condition
10.Prompt :TP value has been cleared.
11.The program will lead to the implementation of the ECM/PCM resetting function” Start the engine and check the engine
Idle speed,If normal,Choose “Cancel”,The idle learning process is completed.If not normal，When satisfied the execution condition, as picture show
Select”Yes”.
12.Select”ECM/PCM” has been reset”See picture 5 ，Idle running about 10mins without the load.Idle speed learning function will automatically be automatically finished.
More test report about Launch X431 please check:Launch X431 Test report