Categories: Auto Coding

How to Activate Cornering Lights via Fog Lights with VCDS for Seat Leon

This instruction guide you how to active cornering lights via For Lights with VCDS for Seat Leon. If you want to know more about VCDS function, please refer to VCD cases.

Preparation:

How to Configure VCDS & Diagnostic Cable for Your Laptop

VCDS 17.8.1 Full+Loader V2/V4 Free Download

 

Steps:

Connect VCDS interface to Seat Leon obd port, run VCDS software.

Select “Select” under the Select Control Module

Select “09-Cent. Elect.”

Select “Coding-07”

Click “Long Coding Helper”

Select “03” then mark “Bit 7 Cornering Lights via Front Fog Lights active”

Close the window and click “Do It!”

Coding accepted, click “OK”

Click “Close Controlled,Go Back-06”

Then click “Go back”, Let’s try how is it look

Function is done.

If you want to know more about Seat Neon, please refer to Seat trouble repair.

Kevin

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

10 hours ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

3 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

6 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago