This short post will show you guide on how to do interior lights with fade-in fade-out activation by VCDS for Seat Lean. More function of VCDS, please refer to VCDS CASES.
Procedures:
Click “Select” to select control module
Select “09-Cent. Elect”
Select “Security Access-16”
Input “31347”, then click “Do It”
Select “Adaptation-10”
Input “ramp” >>”active”, then click “Do It”
Old value: not active
New value:active replace?
Click “Yes”
Security access required, click “OK”
Controller accepted the request. Will now read the channel again…, click “OK”
Function is ready.
This coding function also applies to Volkswagen,Skoda,Audi, if you want to know more about Seat, please visit here: Seat Trouble Repair.
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…