Here is a easy guide on how to active Apple CarPlay for BMW entrynav2 head unit by yourself.
What you Need?
BMW E-sys 3.33.0/3.32.1/3.30.01 Coding Software Free Download
BMW Standard Tools 2.12 Free Download
BMW ENET Cable (Amazon)
Steps:
1.Run E-sys to read ECU
2.Read out data from HU_Entrynav2
3.Search “LONGVIN”
4.Change “werte” to activated VIN-thx/rep PM example
5.Save CAFD
6.Perform CAFD programming
7.Exit E-sys
8.Run TOOL32
9.Load enavevo.prg
10.Click “steuern_routine” and select “configuration” in parameter,then Press F5 to run job
11.Wait about 1 minute
12.Click “steuergerate-reset”
13.Select “Media”–>”Edit removable device”–>”Add new device”
14.Then you will find “CarPlay” option
15.Make your car keep on sleep model (turn off and lock car at least 6 minutes)
16.Now enjoy CarPlay feature on Entrynav2
Notice:Entrynav2 equipped with WLAN port,ATM must exit and run.
And system software need upper from 18-03.
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…