Heavy Equipment Repair

How to Adjust Clutch Pedal for Kubota L3901 Tractor

Here is the instruction show you guide on how to adjust clutch pedal for Kubota L3901 tractor.

 

 

Related Contents:

2022 Kubota Takeuchi Diagmaster v22.08.01 v4.1.2 Software Free Download

Kubota EPC Spare Parts Catalogue 2021.06 Download

Kubota DST-I Diagnostic Tool

 

Adjusting Clutch Pedal (Single Clutch)

1 Stop the engine and remove the key.
2 Slightly depress the clutch pedal and measure free travel at the top of pedal stroke.
3 If measurement is needed, loosen the lock nut (1) and turn the clutch rod (2) or turnbuckle (3) to adjust the rod length within acceptable limits.
4 Retighten the lock nut

 

Adjusting Clutch Pedal (Dual Stage Clutch)
1 At first adjust clutch play, same as with single disc clutch.
2 Remove the cover located on the right side of flywheel housing case.
3 Loosen the lock nut (1), tighten the adjust bolt (2) by using 7 mm spanner until head of the bolt contacts pressure plate slightly.
Make 3/4 turn counterclockwise to give 0.9 to 1.0 mm (0.035 to 0.039 in.) clearance.
4 Tighten the lock nut (1), holding the adjust bolt (2).
5 Turn the flywheel to adjust the clearance of other adjusting bolts (3 bolts).
6 Repeat step 3. and readjust free travel of clutch pedal if necessary.

 

More repair case for Kubota,please refer to:Kubota Trouble Repair

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

2 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

5 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago