Categories: How To

How to Associate microPODs to Service Technicians at CJDR + FA Dealerships

This article explains the steps involved in associating microPODs to Service Technicians in converged dealerships that service FGA (Fiat, Fiat Professional, Alfa, Abarth and Lancia) and CJDR (Chrysler, Jeep, Dodge and RAM) vehicles.

 

WiTECH Related Contents:

wiTech MicroPod 2 v17.04.27 Free Download

How to Setup/Configure MicroPOD for wiTECH 2.0

 

 

Associating microPODs to Service Technician SIDs for performing diagnostics with CJDR vehicles using wiTECH 2.0 Log into the Technical Service Portal at www.witechsystem.com

Within the Manage Assets tab of the Menu Bar, select Manage Assets

All microPods shipped to your dealership will be shown on the Asset Summary page.

To associate a Service Technician with a microPod: 1. Select Edit Users on the appropriate line showing the microPod Serial Number you are associating 2. If No Users’ is shown, this microPod still needs to be associated 3. If a number is shown, it indicates how many Service Technicians are associated to that particular microPod

Locate the correct Service Technician from the drop-down menu and click “Map User” button. (Note: only one Service Technician can be selected at a time)

 

You are Done!

a.The associated Service Technician will then appear as a Mapped User b. Service Technicians and associated microPODs will appear in the wiTECH 2.0 User Interface

If you wish to add multiple users onto a single microPOD, click on the drop down box, select the employees name and click Map User.

a.Continue to add all users as desired.

b.All Service Technician and associated microPODs will appear in the wiTECH 2.0 User Interface screens

Note: DO NOT assign more than 26 users to the same microPOD as wiTECH 2.0 System cannot handle more than that limit. In order to delete users, click the “Delete” button and the employee will be removed from the mapped list.

Note: Allow 30 minutes for the changes to complete before communication can be achieved.

 

 

Associating WSP microPODs to Service Technician Link.e.Entry Login IDs for performing diagnostics with FGA vehicles using wiTECH 2.0.

Contact wiTECH Premium Support Helpdesk at 1-888-948-3241 or via email at witechsupport@dcctools.com and provide the following information:

Link.e.entry Login ID

microPOD Serial Number

CJD Dealer Code (Dealer Code used for accessing DealerCONNECT)

 

Associating WFP microPODs to Service Technician Link.e.Entry Login IDs for performing diagnostics with FGA vehicles using wiTECH 2.0.

If you need to associate a WFP microPod with your Link.e.Entry UserID, please insert VCI serial number in the field provided and ensure you are entering your CJD Dealer Code. (Ex. 33083)

 

 

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

7 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago