Categories: Auto Repair

How to Change Audi A6C6 Part Number via Module Flash File Version on ODIS-E

Some flash files without part number suffix name in ODIS-E VW Audi flash database.You need to ensure the part number by the files name,like _0110/0080/0270/0120.And the file “4F0910793_0120” is for 4F0910793E.

 

Related Contents:

Newest ODIS-E Engineering 17.0.1/12.2.0/9.0.1 Free Download

08.2023 VW ODIS 23.0.5 & 7.2.1 & 5.2.7 Diagnostic Software Free Download

 

 

Run ODIS-E software and go to self-diagnostics function,you will find the module version number

Here take A6C6 driver side door control module as example

Original file number is 4F0910793/0120

And now flash with 4F0910793/0110

Write different file version,you will get different part number show

After flashing finish,click “Show flash record”

Now here go to the report to check the part information that you operation

You will find the part number change from “4F0910793E” to “4F0910793B”

 

If you do second part number changing operation,the codes still not change

Remember after flashing,please change the code back to original

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

2 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

5 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago