Heavy Equipment Repair

How to Change Maximum Road Speed for CM2150 Engine

INSITE diagnostic software allows you to change “Road Speed Govemor” value for engine.Here take CM2150 as example to change “Maximum Accelerator Vehicle Speed” and “Maximum Vehicle Speed”.

 

Preparations:

INSITE 8.9.2 Engine Diagnostic Software

Cummings INLINE 6 Diagnostic Adapter

 

Procedures:

After INLINE 6 Datalink adapter connection between laptop and ECM,run INSITE diagnostic software,and build communication to CM2150 ECM.

Click “Features and Parameters” at left side menu

After features and parameters show,scroll download to locate “Road Speed Govemor”

You will find there are several options for speed

Select “Maximum Accelerator Vehicle Speed”

Change ECM value from “70 mph” to “80 mph”

 

Then right click the item and select “Send To”à”ECM”

INSITE is ready to save changes to the ECM.

White the operation is in progress,do not turn the key switch ON or OFF unless instructed to do so.

Click “OK” to continue

Now please “turn the key switch off”,and then click “OK”

Action Waiting 30 seconds before allowing for Key ON

Please turn the key switch ON,and then click “OK”

All parameters were written successfully to the ECM.

NOW try do road test.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

21 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago